| # | Post Title | Result Info | Date | User | Forum |
| Website does not open | Relevance | 2 Wochen ago | jogi | eBlocker Open Source Forum |
| | Hello eBlocker Community,if eBlocker is running (not paused) I can not reach the car configurator from Skoda (Germany).I am not sure, if it is allowed to post the direct Link..if so, I will post it later on.Is it a filter or something else that I have to deaktivate or set an exeption for it?I hope someone of you can help me. thx |
| Blocking ads in Android apps | Relevance | 1 Monat ago | Beto | eBlocker Open Source Forum |
| | In the forum I found how to install the certificate on my Android device and in FF (FENNEC) however I fail to block the advertising that appears in many Android apps (games, anime, streamig, etc.) I wanted to know if it is normal or did something wrong, I have added a couple of lists to the Eblocker blocker, but I fail to filter the advertising, on the other hand that passes in ROKU systems It is not possible to install a certificate that will be so effective in these devices? Thanks and greetings |
| checking for updates fails / android phone connects to wireless lan, but without internet access (exclamation-mark) | Relevance | 1 Monat ago | Athlan | Bugs & Issues |
| | hi people! I have got two problems with my eblocker. The first is that checking for updates manually fails for some unknown reason and the second is that my android device connects to the wireless network, but only without internet connection as indicated by the exclamation mark besides the wlan symbol on android. In the past, restarting the eblocker (which serves as dns server) has always helped but not this time. I figured that this might be due to an old eblocker system-version and wanted to trigger manual update, which failed without reason, as you can ... |
| Vimeo-based Support-Videos need registration - intended? | Relevance | 2 Monaten ago | hsphh | eBlocker Open Source Forum |
| | Hi, recently, I started with eBlocker. So fare, it looks promising; thanks for the interesting work. I ran into some problems with Firefox on Android. During my research, I tried to use the vimeo-based videos at removed link If I try to watch them, vimeo asks me to register/login in Attachment : 250601-eblocker-org-vimeo-videos.png Is it intended or maybe it needs some other configuration on TimF-side? I cross-checked with Firefox 139 and Chromium Version 136.0.7103.113 on a Linux machine. Also, I paused eBlocker for this device to see if i ... |
| Configuration for Apps Providing Newspaper Content from Madsack Group (RND) | Relevance | 2 Monaten ago | facebita | eBlocker Open Source Forum |
| | Is there a tried & tested setting for enabebling a reliable but as well data-saving usage of iOS apps for the content of Madsack group newspapers, e.g. Leipziger Volkszeitung or Hannoversche Allgemeine Zeitung? When one tries to configure such a setting by trial & error using the "manual diagnosis" function, one have to deal with appr. 40 providers. At least for me it is confusing, which of these providers are mandatory and which not. |
| Fritzbox and DHCP server | Relevance | 2 Monaten ago | facebita | Bugs & Issues |
| | I operate an eBlocker that is connected via LAN cable with a Fritzbox 7690. Is it furthermore mandatory to run the DHCP server on eBlocker but no on Fritzbox? Or could I run meanwhile the DHCP server as well on Fritzbox without run in trouble? I would like to provide internet access via WLAN to all members of my household basically via Fritzbox without eBlocker features. Only me myself is using eBlocker features particularly VPN access per iPhone and Mac. So I would like to have the entire setup for the „normal“ internet users on a single device, i.e. the F ... |
| Apple captive Portal and Wlan Problem | Relevance | 3 Monaten ago | Rene | Bugs & Issues |
| | Hello and good evening, unfortunately the workaround does not work here. The login page still comes up, along with a warning. Now I can't open any websites at all. I always get a malware message. I have tested all suggestions. The behavior can be observed on an Iphone 12, an Iphone 13, an Ipad Pro and a Macbook Pro. Is there any other idea?best regards Attachment : Bildschirmfoto 2025-04-30 um 23.35.25.png Attachment : Bildschirmfoto 2025-04-30 um 23.39.29.png |
| App Feedback Button | Relevance | 4 Monaten ago | jogi | Bugs & Issues |
| | Hello eBlocker Team,I do not know if it is a real issue.If I press this button for more than one new/edited app, I only get once a feedback email: Attachment : Screenshot01.png Do the eBlocker team get every app suggestion or only this with the email feedback? It seems to make a difference in which time span I click the button and send the email. Thanks and you all do a great job! |
| Wireguard Support | Relevance | 5 Monaten ago | henryFatzke | eBlocker Open Source Forum |
| | I hope I won't be too annoying if I bring up the topic of Wireguard support again, but it has now become a virtual standard due to its "simplicity and speed"! I don't know what is/would be more difficult to implement, tapping the connections from the router so that eBocker can work with it, or integrating a Wireguard server function into eBlocker, or are there perhaps other approaches that I have no idea about? Proxy? Or ??? In any case, it would be great if eBlocker could get this feature in the foreseeable future. Unfortunately, my Fritzbox is responsible ... |
| HTTPS-problems (exclamation mark) | Relevance | 5 Monaten ago | Winfried | eBlocker Open Source Forum |
| | Hello Hope my issue doesn't get boring for you after so many years. I had the problem some years ago and got it solved with your help, but I have no idea today how I did it. I have been running eBlocker on a Rhasberry 4 for years now. Today I first tried to activate the "Consent- and Cookie-Tracking blocker" you described in your last newsletter, but could not find the item. Then I got the impression that the device seemed not to update anymore; then I found out, as years ago, that again there was an exclamation mark after HTTPS-filtering. I checked the ce ... |
| Tutorial, allways get the latest bugfree VM Edition for all common VMs english and german! | Relevance | 6 Monaten ago | henryFatzke | eBlocker Open Source Forum |
| | Hi Guys, i made a Tutorial for all Users who wanna make theyre own latest Image, bugfree, without having trouble at the registering process! You can use the official .omv Image and convert this to youre preverred VM solution! Just read the attached PDF tutorial in youre preverred language and follow the steps! Have fun... Hallo Leute, ich hab hier eine Anleitung zusammengebastelt, für alle die ein Bugfreies Image erstellen wollen, immer in der aktuellen Version und ohne Probleme beim anmelden, bzw. registrieren für alle gänigen VM Lösungen! Ladet Eu ... |
| Worthy successor for the White Cube? | Relevance | 7 Monaten ago | Julius | eBlocker Open Source Forum |
| | Hi, unfortunately my White Cube has now stopped working. It lasted a long time 🙂 I would like to ask carefully when we can expect a version for Raspberry 5, because when I buy new hardware, I tend to buy the more powerful & long-supported product. The price difference is not that significant for me.I would also test a beta image... |
| www.kuketz-blog.de can not be connected | Relevance | 7 Monaten ago | facebita | Bugs & Issues |
| | I am facing a weird issue: If eBlocker is active Firefox as well as Safari on iOS does not load the website www.kuketz-blog.de. I have added the domain as a trusted website in eBlockers HTTPS settings. But the issue is remaining. But when I pause eBlocker the website is being loaded. What hinders the browser on loading the website when eBlocker is active? |
| YouTube Ad Blocker Message | Relevance | 8 Monaten ago | etuckeriv | Bugs & Issues |
| | This morning on YouTube I began getting this pop-up when I watch a video: Attachment : image.png It seems to be related to the uBlock filters, after I disable that in the blocker the popup goes away. I found this article from earlier this year about adding a filter to your uBlock list, but I couldn't find a way to do it in the blocker. Any ideas? |
| Firefox 131.0.3 Error: connection failed | Relevance | 9 Monaten ago | andisa | Bugs & Issues |
| | Since some weeks I get the following error message, when I try to open the eBlocker dashboard: Error: Connection failed An error occurred while connecting to 192.168.xxx.xx. The website may be temporarily unavailable, please try again later.If you are also unable to access another website, please check the network/Internet connection.If your computer or network is protected by a firewall or proxy, please make sure that Firefox is allowed to access the Internet. The same message occures, when I use the Brave Browser. In both browser the eblocker icon is n ... |
| eBlocker Mobile connectivity on mobile/cellular network | Relevance | 11 Monaten ago | etuckeriv | Bugs & Issues |
| | Hello! I have eBlocker Mobile setup on my eBlocker and my android phone. I have noticed that I can connect to it and everything works great when I'm connected to WiFi (not my home WiFi, but other WiFi hotspots outside of my home network), however I am unable to connect properly while I am on my mobile/cellular network. The OpenVPN Connect status shows that it is connected, however I cannot reach the internet or any of my network devices (such as the eBlocker appliance or my pfSense router/firewall). I am in the US and use Mint Mobile as my carrier (a T-Mob ... |
| Firefox 128 - disable PPA tracking | Relevance | 1 Jahr ago | Random | Official Announcements |
| | Mozilla announced in-browser tracking called PPA (Privacy-preserving attribution) for Firefox 128 (and higher). See: The feature is enabled by default! As we are against all tracking, we'd like to encourage Firefox users to disable the feature. To disable PPA tracking in the browser: Click the menu button and select Settings. In the Privacy & Security panel, find the Website Advertising Preferences section. Uncheck the box labeled Allow websites to perform privacy-preserving ad measurement. Attachment : IMG_7842.png Next to this mi ... |
| Bitdefender Warning | Relevance | 1 Jahr ago | TomTom | eBlocker Open Source Forum |
| | Hello eBlocker user This warning always appears when I visit eblocker.org GreetingsThomas Attachment : warning.jpg |
| eblocker with fritzbox error dns | Relevance | 1 Jahr ago | alterKelte | Bugs & Issues |
| | hi,the name resolution of the eblocker, which is operated in automatic network mode on a fritzbox 7590, no longer works correctly since the domain fritz.box (45.76.93.104) was registered. a ping to a local server returns 45.76.93.104 when the eblocker is activated, and the correct 192.168.178.55 when the eblocker is deactivated. how can i achieve the correct resolution again with eblocker activated? ciao markus |
| eBlocker on a thin client PC with 2.5Gbit Ethernet LAN Port | Relevance | 1 Jahr ago | Proton | eBlocker Open Source Forum |
| | Hello All, I have a Gigabit / 1,000 Mbit/s internet connection (which also arrives at 1100/55Mbit brutto). In order to get around the hardware LAN limit of the RP4 of 1000Mbit/s, I would like to run the eblocker "on a boot PC directly without OS" on a ThinClient PC with a 2.5Gbit LAN connection.To extend the download rate via the eblocker. Can you please tell me whether this increases the maximum download speed of the eblocker (at the moment I have a download speed of around 450Mbit, when the eblocker/RP4 works as a gateway.Is there any hardware that has ... |
| New devices InProComm... | Relevance | 1 Jahr ago | Micha | eBlocker Open Source Forum |
| | Hello, devices named 'InPro Comm (1)' keep appearing in my device list, even though I haven't added any new devices.If I delete them, they come back after a few days.Does anyone know what that might be? Best regards Micha Attachment : Geräte.jpg |
| eBlocker https | Relevance | 1 Jahr ago | vnn | eBlocker Open Source Forum |
| | Hello alle of you, my eBlocker cube Version 3 works so well and he blocks very well. However there is a issue with the https. I extract the certificate from the device and import this into the operationsystem in Linux and WIndows. If I visit a webpage that it isnt in the list I get aa message that the controlbar has denied the conection and I can't see anything. When I add this into the list access to the site is available but the controlbar dooesn't show up. Is there an issue in the Beta Version 3? Also I wondered that I have only access to the eblocke ... |
| Running an Experimental Server on a Virtual Machine within the Network | Relevance | 1 Jahr ago | facebita | Bugs & Issues |
| | I want to configure and run an experimental server on a virtual machine within my local network. The host is my Mac running Virtualbox. The server is a Debian guest on this host. I want to configure the guest following this description: And now I have a question regarding the static IP address of this server. In chapter 6 of the aforementioned description it is recommended to define a static address directly in the settings of this server. Can I follow this instruction, or will it cause troubles with the DHCP server provided by my eBlocker? |
| Eblocker and ChatGPT | Relevance | 1 Jahr ago | Micha | eBlocker Open Source Forum |
| | Hello, I want to use Chatgpt. If the eblocker is active, this doesn't work. I tested it in different browsers. Only when I pause the Eblocker can I work with Chatgpt. I have already added 'chatgpt.com' to the trusted websites but it doesn't work. No https connection errors are recorded either. Can someone help me? Greeting Micha |
| Deactivate VPN automatically | Relevance | 1 Jahr ago | thomas@beier-team.de | Features & Priorities |
| | Hello dear eblocker team Is there a way to integrate a function in the eblocker os that automatically disconnects the anonymization function if the VPN provider fails? Possibly also with a notification function. (email?) The background is that my wife and my children are also in the WLAN / LAN in my home network. If the VPN provider has a problem and I am not at home, the other family members can no longer access the Internet due to a lack of eblocker knowledge. GreetingsThomas |
| Delete - All events older than one week - does not work | Relevance | 1 Jahr ago | jogi | eBlocker Open Source Forum |
| | Hello,can anyone confirm that deleting events older than one week does not work: Attachment : eBlocker 12.jpg In my case, only the second option "Delete all" works. |
| Apparent discrepancy on the dashboard (version 3.02) concerning the presence of the certificate | Relevance | 1 Jahr ago | adaeweritz@t-online.de | Bugs & Issues |
| | Along time ago, I started to use eBlocker in the form of the white cube. When the cube failed to accept a further update I installed the eBlocker software on a Raspberry 4 and continued my computer life with this eBlocker. Then I learnt to reactivate the white cube by installing an SD-card and returned to the cube. Since then I keep both eBlockers up-to-date (the Raspi as a spare fall-back version). Presently, eBlocker’s OS version is 3.0.2. Now to the reason for this mail: Last month, I transferred my mac-system from an iMac 27“ (Big Sur) to a new Mac St ... |
| RE: Backup broken under 3.0.1 | Relevance | 2 Jahren ago | thomas@beier-team.de | Bugs & Issues |
| | Hello dear community Where is a backup saved to in > System > "Save settings"? When I click on the button, a "spinning top" appears briefly and then nothing happens. If I then click on "Restore settings", an Explorer window opens with the path "C:\Users\thomas\AppData\Local\Microsoft\Windows\INetCache\IE\PLNGMSW8" but without a backup file. The search does not find an *.eblcfg file in the entire C: drive. Thank you |
| Original eBlocker version (from inception 7 years ago) never activated | Relevance | 2 Jahren ago | CBR | eBlocker Open Source Forum |
| | Is the hardware version I have still operable? It is the original lifetime version. Due to certain events and life challenges, I never used my original eBlocker. --->Actually, it's still in the mailing package unopened. I have everything that was initially sent to me. I've been reading the eBlocker site & have downloaded the original manual. I realize it may have to go through many updates. Is it possible? Adding that it's simply for home use. I have an old Mac which I plan to replace but not yet. |
| eBlocker and additional AVG Internetsecurity: to what extent is this superfluous? | Relevance | 2 Jahren ago | Bastet | eBlocker Open Source Forum |
| | In addition to the eBlocker, I have installed "AVG Internetsecurity". Irrespective of the fact that this software is intrusive, I fear that, similar to unfavorable Firefox settings (e.g. DNS via HTTPS not deactivated), some of the many options of the above-mentioned AVG software also restrict the functions of the eBlocker with superfluous settings. For example, is the antivirus function also superfluous and, if so, which ones?- In the hope that one or the other is familiar with the software 😥 txs |
| No Internet Connection When HTTPS is Active | Relevance | 2 Jahren ago | facebita | Bugs & Issues |
| | Tonight, unexpectedly my Mac lost its connection to the internet. My Mac has an installed HTTPS certificate from my eBlocker and HTTPS is activated. Obviously there is something happend with the HTTPS configuration in the eBlocker. Because both of my gadgets that are running a HTTPS certificate are unable to connect the internet. But when I on this gadgets discable HTTPS or eBlocker at all, both connect to the internet. The diagnosis tools from my eBlocker doesn’t show any failures. What should I do in order to determine the cause of the malfunction of HTTPS ... |
| Reactivating eBlocker after Shutdown | Relevance | 2 Jahren ago | facebita | Bugs & Issues |
| | I have shut down my eBlocker. Then I have it unplugged from power supply and from the Router Fritzbox 7490. Next I reconnected the LAN cable and the power supply. But now my WLAN were not working. So I activated the DHCP server on the Fritzbox. That brought my WLAN back alive. But my eBlocker remained and remains unreachable in the network on its previous IP address. What can I do in order to reconnect my eBlocker and make it working? |
| tracking protection in Firefox for Desktop | Relevance | 2 Jahren ago | jogi | eBlocker Open Source Forum |
| | Hello, which of the 3 possible options offered by Firefox does the eBlocker team recommend? - Standard - Strict - Custom I would like to avoid or reduce double blocking if possible. Best regards |
| Cloudflare | Relevance | 2 Jahren ago | jogi | eBlocker Open Source Forum |
| | Hello all, can anyone help me why I always end up on this page first when I go to the address is it because of the eBlocker? Attachment : cloudflare.jpg If I set the hook (2x), then I finally get to the desired page - but annoying it is. No idea what Cloudflare is and what it is good for. Thanks 😀 |
| Missing map on Electricity Maps | Relevance | 2 Jahren ago | jogi | eBlocker Open Source Forum |
| | Hello at all, why is the map not displayed on Attachment : Firefox01.jpg Is this an eBlocker issue, can someone jump in and help please? Many Thanks! |
| Consent & Cookie-Banner Blocker | Relevance | 2 Jahren ago | jogi | eBlocker Open Source Forum |
| | Hello all, is there a possibility to create an eBlocker filter similar to the browser extension "I don't care about cookies" ( Thanks for help. |
| Understanding question when using two subnets | Relevance | 2 Jahren ago | Joe | eBlocker Open Source Forum |
| | Hi, Subnet A is the network to the internet and the WLAN. Subnet B is the network secured by eBlocker. I have limited the end devices to the most necessary for the question. Subnet A 192.168.30.nRouterA IP 192.168.30.30RouterB 192.168.30.50Notebook 192.168.30.80 / Gateway 192.168.30.30 Route 192.168.100.0 - 192.168.30.50 Subnet B 192.168.100.nRouterB IP 192.168.100.100eBlocker 192.168.100.20 / Gateway 192.168.100.100NAS 192.168.100.70 / Gateway 192.168.100.20 The NAS (http-site) can not be accessed from the notebook, although ping and tracert are succes ... |
| forum website test, Error 2252 | Relevance | 2 Jahren ago | minger | Bugs & Issues |
| | this topic is to test the Error 2252 | Please contact the forum administrator,which I encountered when logged in, posting a comment (or topic) from FF I am to test here my extensions/plugins |
| EBlocker deactivates itself for a device suddenly | Relevance | 2 Jahren ago | taipan | Bugs & Issues |
| | Hi all, great to see eblocker is evolving with IPv6 and the VM you created. Keep up the great work. Setup: eblocker is connected to a fritz!box and set up in individual mode. Settings confirmed within the browser (Firefox) and the wonderful eblocker App on my iPad. Websites tested: CNN.com, Spiegel.de, untertauchen.info, eblocker.org Issue: Since Wednesday approx noon, eblocker deactivates itself for my iPad connection and does not show any entry for domains. I had it always activated but suddenly noticed that some ads etc. coming through. I checked t ... |
| Android 11 and Firefox: This is how it works for me | Relevance | 2 Jahren ago | tdq | eBlocker Open Source Forum |
| | I had the problem that I could not install the certificate on my Firefox on Android 11. After a long search, I found this solution that works for me and might also interest you. My environment is in German, so I describe everything in German. If someone knows the exact terms in English OS, please add. download the certificate from the mobile phone on the E-Blocker Dashboard. add the certificate in Android "Einstellungen" -> "Sicherheit" -> "Verschlüsselung und Anmeldedaten" -> "Ein Zertifikat installieren" -> "CA Zertifikat". Now select the ce ... |
| ProxMox: How to upload VM-Disc | Relevance | 2 Jahren ago | TuXXer | Bugs & Issues |
| | Hi, actually I'm trying to install eblocker on ProxMox following the avaialble document. Now I'm stuck in step 2 (upload of vmdk to ProxMox). Can someone give me a little bit more information? Thank you for your help! |
| Do I Know My Hardware? | Relevance | 2 Jahren ago | facebita | Bugs & Issues |
| | Why do I not see on my eBlockers website information about the hardware where my eBlocker is being installed? |
| Snowflake | Relevance | 2 Jahren ago | facebita | Bugs & Issues |
| | Why Snowflake by default isn't a trustworthy service on eBlocker? I've added snowflake.freehaven.net to Mozilla Thunderbird / Firefox. |
| you.com | Relevance | 2 Jahren ago | facebita | Bugs & Issues |
| | Why does eBlocker by default block the new search engine you.com, 172.66.43.199, created by the Dresden originated scientist Richard Socher? |
| Raspberry Pi 4 setup before flashing eBlocker software | Relevance | 3 Jahren ago | Chris4711 | eBlocker Open Source Forum |
| | Really simple question and I do not find any answer. Neither Google, You.com nor this forum…😓 Do I need to flash any kind of Raspberry OS from the official Raspberry Homepage before flashing the eBlocker Software onto the microSD Card? Highly appreciated, brief reply - thank you very much. Chris |
| New license key | Relevance | 3 Jahren ago | TomTom | eBlocker Open Source Forum |
| | hello random, I had to reinstall my SD card, please re-enable automatic updates. Thank you |
| eBlocker mobile and Fritz!box 7490 | Relevance | 3 Jahren ago | facebita | eBlocker Open Source Forum |
| | Obviously something has being changed. I have a Fritz!Box 7490 that has been working seemlessly with an eBlocker running on Raspi3 via eBlocker mobile. Now, I have configured my eBlocker as a brand new one from the scratch. But now, it is to me impossible to configure eBlocker mobile. I use - as before - my dynamic DNS address namesomeoddletters.myfritz.net. UPnP is being activated on Fritz!box. So in next step, I let try eBlocker to self assign the appropriate ports 1194 to 1194. That is calling success. But then, when I push the button "test connection" ... |
| Copy micro SD card? | Relevance | 3 Jahren ago | thomas@beier-team.de | eBlocker Open Source Forum |
| | Hello dear forum community.My question, is it possible to copy the micro SD card with the e-blocker OS installed and set up (as a backup in case of a defect) ? |
| Serious Problems Obviously After Update on 2.10.x | Relevance | 3 Jahren ago | facebita | Bugs & Issues |
| | Since today my eBlocker does not work and, more worsen, obviously did something so that I can not reach the internet even when I unplug the eBlocker from my Fritzbox. I assume, eBlocker performed tonight the update to version 2.10. As well I can not contact my eBlocker via ssh on its IPv4 address in my WLAN: Connection refused at port 22. I am really at the end of my cababilities. I do not really know, where to begin and which steps to go. If I klick on an URI I get the following message in the browser: Error Sorry, an error has occurred. Details: ER ... |
| codeberg.org blocked as Malware | Relevance | 3 Jahren ago | gerhardb | eBlocker Open Source Forum |
| | Hi, Codeberg.org was blocked as Malware some days ago and is still blocked. They are aware of the malware issue ( removed link ) but it is not helpfull to block the whole domain of an git instance. How can they be removed from the malware list? Using no https support yet Is there a way for me to whitelist them? The "allow domains" list doesn't work (but I can`t find in the docu in which format the domains need to be entered) Thanks Gerhard |
| Zoner Photo Studio makes problems when starting with eBlocker running. | Relevance | 3 Jahren ago | Winfried | Bugs & Issues |
| | Hello! I have been using Zoner Photo Studio (ZPS) as a graphics program for a long time. Since several months I have this problem: When I start ZPS it claims that some certificate is not valid - if I want to proceed anyway. When I klick "Yes", the error occurs again (and again ...). When I click "No", it repeats the same for 4 times, and then the program starts. I tried to solve it with the ZPS team, but they could not find out what goes wrong. Then I discovered that, when I pause eBlocker and then start ZPS, it starts all fine without error, and this remai ... |
| Webinar at edudip.com | Relevance | 3 Jahren ago | facebita | Bugs & Issues |
| | Does somebody know how to configure eBlocker in order to take part in a webinar broadcasted via edudip.com? I would like to keep all ad blockers and tracking blockers alive while joining the webinar. How would it work? |
| eBlocker mobile - https diagnosis | Relevance | 3 Jahren ago | jogi | Bugs & Issues |
| | Hello eBlocker Team,I noticed that I cannot use the manual https diagnosis via the eBlocker mobile connection.Why is that? |
| eblocker cube doesn´t work | Relevance | 3 Jahren ago | CA87 | eBlocker Open Source Forum |
| | Hey, my cube doesn't work anymore. I can no longer access the cube via the browser. also in the Fritz box is not indicated. What can I do ? |
| VPN connection fails | Relevance | 3 Jahren ago | thomas@beier-team.de | eBlocker Open Source Forum |
| | I have 2 identical Raspberry Pi 4 with e-blocker in operation (company and private).With both devices I have problems with the VPN connection from the beginning. In irregular intervals, sometimes after 5 days, sometimes after 10 days, sometimes after 3 days, the VPN connection is disconnected. (the VPN connection icon in the overview is then grayed out).I have tested the following VPN operators: Mullvad VPN (mullvad.net) and OVPN (ovpn.com).In the case of Mullvad VPN, no website is accessible when the connection fails, in the case of OVPN, the VPN connection ... |
| Zoom does not work - again and again query: "Windows Security" username and password ... | Relevance | 3 Jahren ago | eblocker-fan | Bugs & Issues |
| | With your post please always report Hardware you use for running eBlockerOS-> MACBOOK PRO with WINDOWS 10 eBlockerOS version as well as filter lists version-> eBlockerOS version, 2.9.1, eBlocker blocking lists version 2022-06-08-12-58-25 eBlocker network mode (auto, individual or expert)-> expert Which devices runs DHCP server? Router/external, eBlocker or client fixed IP?-> eBlocker IPv6 disabled for client/network?-> disabled Client browser and OS version (i.e. FireFox 80.1 running on macOS 13.4)-> FireFox 101.0 and 97 My problem i ... |
| Squid Update needed | Relevance | 3 Jahren ago | Paddyk | Bugs & Issues |
| | The used squid in eblocker is oudated. Please consider an urgend upgrade of the component.There are several CVEs realated to the used version: CVE-2020-11945, CVE-2019-12519, CVE-2019-12524, CVE-2019-12526, CVE-2020-11945, CVE-2019-12524 are the critical ones. I have also 10 high rated ones...Eblocker should increase security and not compromise it |
| Problem with certificates and updates | Relevance | 3 Jahren ago | Micha | Bugs & Issues |
| | Hello, HTTPS has stopped working since the 2.9.1 update. The certificate is no longer recognized, neither in Edge nor in Firefox or on Android devices. I installing a new certificate doesn't change anything. In addition, the manual check for updates no longer works. I get the message 'Check for updates failed' (500 - Internal Server Error - Could not initialize class sun.secritiy.ssl.SSL.ContextImpl$TLSContext). Restarting Eblocker and Browswer didn't help either. The function test shows a red exclamation mark at 'Website filtering (HTTPS)' My conf ... |
| YaCy and eBlocker | Relevance | 3 Jahren ago | facebita | Bugs & Issues |
| | Does somebody here already made experiences with using a YaCy installation on a device behind an eBlocker? |
| Use of eBlocker Mobile & power consumption | Relevance | 3 Jahren ago | jogi | eBlocker Open Source Forum |
| | Hello all, I use eBlocker Mobile daily via OpenVPN at Android. What options do I have to save battery? The app has a very high battery consumption. Thank you |
| Problem with internet access after Fritzbox parental controls change | Relevance | 3 Jahren ago | PJK | Bugs & Issues |
| | Dear eblocker team, have current SW on the e-blocker in auto mode and had to change the parental controls on Fritzbox 7590 with current Fritz OS. Fritz.box DHCP enabled and working. I haven't had internet access since then, but WiFi works fine internally. When eblocker is off, everything works as before, but of course without the eblocker advantages. Have already reset each device and refigured eblocker from/back to auto mode (it finds Fritz DHCP server without any problem). I just can't access the Internet on no device (Windows, Android) with the ebl ... |
| RE: New license key | Relevance | 3 Jahren ago | Ralf Knabe | eBlocker Open Source Forum |
| | Hi there, I had to reinstall my SD-Card and wanted to reinstall my donor license (donation 14.11.2021), unfortunately I do not have my mail with the donor license anymore. What should I do to get to my license number? Please excuse my bad English. Many greetings Ralf |
| Remotely Configuring a Device for Remote Access | Relevance | 3 Jahren ago | facebita | Bugs & Issues |
| | I have connected a Rasperry Pi via LAN with a Fritzbox 7490. As well with this Fritzbox is connected via LAN my eBlocker which is providing my eBlocker mobile VPN gateway. Now, I am on the way. But nevertheless, I want to access via ssh to the Rasperry Pi. How can I get it? |
| eBlocker mobile has stopped working properly | Relevance | 3 Jahren ago | facebita | Bugs & Issues |
| | For a few days eBlocker mobile has stopped working properly. But I did not change anything in the configuration. Before my iPhone automatically switched between cellular connection and known wifi connections seemlessly. In the same way VPN to eBlocker mobile has being switched off when going to connect via wifi. But now, for a few day, it has stopped working properly. Now, if I enter a known wifi area, in the display of my iPhone the icon of cellular network with the VPN icon on its right side disappears and for short the wifi icon is being shown. But no in ... |
| Configuring Apple Homepod Failes | Relevance | 3 Jahren ago | facebita | Bugs & Issues |
| | I think, here is something wrong with DHCP. When I try to configure a brand new Homepod it returns failure code 301009. As far as I understand, this is a problem regarding the integration of the device into the WLAN. In my case, I have a well working installation of a Fritzbox 7490 with an eBlocker, where eBlocker is providing the IP adresses within the network. Does somebody here know the settings of eBlocker which are apropriate in order to get Homepod working? PS: Failure code as shown on Home App on iOS ist 301009. |
| VPN not working | Relevance | 3 Jahren ago | corepro | Bugs & Issues |
| | Hello, unfortunately the VPN connection does not work. I have tried several recommended providers (NordVpn, Hide.me). I get always the same error message. A connection to Tor is possible without any problems. Error Message: Sat Feb 26 10:09:37 2022 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Can someone help me ? |
| New license key | Relevance | 3 Jahren ago | thomas@beier-team.de | eBlocker Open Source Forum |
| | I have reset my e-blocker (with new sd card) and need a new activation of the automatic update. How can I request this? |
| In PDFW | Relevance | 3 Jahren ago | taipan | Bugs & Issues |
| | Hi all a quick one. I saw in my personal device firewall. Not app-measurement.com or any other domain name. What does this mean? It looks so different from all other entries. Can I block it the same way? |
| DNS over https/… over TLS | Relevance | 3 Jahren ago | Newbie | Features & Priorities |
| | I would like to see the possibility to use DNS over https or TLS. |
| Rotating VPN Profiles | Relevance | 3 Jahren ago | Newbie | Features & Priorities |
| | I would like to see a possibility, if this is at all possible to do, to rotate my VPN profiles. E.g.: I import 10 profiles, 3 in Germany, 4 in CH, and 3 of another VPN provider. I would like to be able to day: Rotate between the profiles a) randomly b) within a region, e.g. Germany or EU 3. Between VPN providers 😱 4. Between a group of selected profiles. |
| SSL in GrapheneOS | Relevance | 3 Jahren ago | Newbie | eBlocker Open Source Forum |
| | Hi all. I minor question 😍 I use GrapheneOS as my preferred mobile OS. I installed the SSL Certificate of eblocker in GrapheneOS. But to me it appears that the apps dont catch it. I installed it in Fennec and then I can surf normally. But some apps use https and hence would need o recognise the certificate,m e.g. bromite, but it seems they dont. The grapheneOS chaps answered: Don’t interrupt SSL connections 🙁 Anyone here have any idea? I am aware that this is not necessarily an eblocker issue but a GrapheneOSOS or android one, but I thought maybe s ... |
| Eblocker on faster HW | Relevance | 4 Jahren ago | taipan | Features & Priorities |
| | EBlocker is now running on Linux, if I recall correctly. I would like to see eBlocker on faster hardware, such as teklager or Protectli. This would also solve the VPN performance issues on Raspi. Not an issue by eblocker software, a natural limitation by raspi processor. |
| Manually blocked domain is not blocked | Relevance | 4 Jahren ago | taipan | Bugs & Issues |
| | Attachment : D51AFA6F-813D-482F-A057-8FF9BD30A1BF.jpeg Dear all, first of all: Thanks for adding the beta (I am aware of this) feature to show the domains blocked and the personal device firewall. Awesome. I think I found a bug, but not sure. I saw access to graph.facebook.com I checked and applied: Always block. The entry graph.facebook.com appears in the Blocked Domains list as graph.facebook.com Now I checked again, and there was an entry to graph.facebook.com with a green check mark and not a red circle. Please see attached picture. Wha ... |
| Doktor in eBlocker: ip6 | Relevance | 4 Jahren ago | Bastet | Bugs & Issues |
| | Hello,the function "Doctor" in the eBlocker returns the message, ip6 is not activated. This although in my Fritzbox 7490 the ip6 protocol was enabled and my ip6 address could actually be determined. Meanwhile I deactivated ips6 in the fritzbox until the eBlocker can ip6. |
| Configuring a Remote Gadget for Usigen eBlocker mobile | Relevance | 4 Jahren ago | facebita | eBlocker Open Source Forum |
| | I want to configure a remote Mac for using my eBlocker mobile. But this Mac can not be brought into my WLAN. What do I have to bring personally from my WLAN to this Mac in order to configure it for using my eBlocker mobile VPN? Sketch: My Mac (((WLAN))) (Fritzbox/eBlocker) < - Internet/eBlocker mobile - > remote Mac |
| timeout on blocked content delays page loading | Relevance | 4 Jahren ago | ABAC | eBlocker Open Source Forum |
| | on some sites (e.g. www.t-online.de) with many ads - there are several timeouts (each ~20sec) for blocked content which delays loading the page up to 30-60 sec. how does eBlocker answer blocked requests? are they droped/not answered? e.g. pi-hole has the option to answer with 0.0.0.0 to prevent those timeouts is there any configuration in eBlocker I missed? |
| Status bar does not show blocked content | Relevance | 4 Jahren ago | pitje | Bugs & Issues |
| | Hello all, I have the problem that eBlocker does not show blocked content. When I'm on Youtube the bar shows "0 ads" and "0 trackers", which can not be :-/. Attachment : youtube_statusbar.PNG After a current call, no entry appears in the history either. The rashes that are displayed, I can not assign. Attachment : user_dashboard.png Does anyone know the problem? For testing purposes I configured the eBlocker as "expert" and set the DNS server and gateway on my PC to the address of the eBlocker. The problem is cross-browser in Firefo ... |
| camouflage | Relevance | 4 Jahren ago | muc | Bugs & Issues |
| | Hello, I noticed during the "privacy check" that the device camouflage does not work. Whether Android or even Linux etc. is set, nevertheless the exact data PC, W10 and Firefox are displayed. Once the camouflage worked, but now again not. What could be the reason for this? Already many thanks and greetings |
| certificate outdated | Relevance | 4 Jahren ago | JoergH | eBlocker Open Source Forum |
| | After some time, I have connected the eBlocker to my network again and last night it also installed the updates. But now I have the problem that on the one hand my iPad no longer opened or updated any apps and emails were not sent. The iPad always said that the eBlocker certificate was not correct. On my Windows notebook, no website opened either and I didn't receive any e-mails either. Then I removed the eBlocker from my network and everything worked again. But I would like to use the eBlocker and the security functions. What do I have to do so that I can s ... |
| Cannot install the certificate in VPN and apps | Relevance | 4 Jahren ago | tdq | eBlocker Open Source Forum |
| | I have an Android one (11) and would like to install the certificate under VPN App User Certificate. Unfortunately I get the message: File cannot be used. I read here in the forum that I should reduce the validity of the certificate to two years. Unfortunately, this has brought nothing. Under the item WLAN and CA I was able to install the certificate. Unfortunately, this did not do anything for the apps or the browser (Firefox). Do you have a tip what I could do? Thanks a lot |
| Different Behaviour at LAN or WLAN | Relevance | 4 Jahren ago | facebita | eBlocker Open Source Forum |
| | I am connecting my MacBook Air with Fritzbox only via WLAN. On eBlockers website > devices my MacBook Air is shown as eBlocker activated. Everything works very well. Just now, for the first time, I have connected my MacBook Air via LAN cable with Fritzbox. It has got the same IP address. It is shown on eBlocker website > devices as eBlocker ativated. But, now there are on websites shown advertisements as not before on WLAN. What's wrong? |
| httpsguide is a blank page | Relevance | 4 Jahren ago | Akandesh | Bugs & Issues |
| | I just installed eBlocker for the first time and when trying to enable https and install cert the wizard just redirects me to a blank page. Checking the console leads me to Attachment : image.png |
| Weird DNS Issue | Relevance | 4 Jahren ago | facebita | Bugs & Issues |
| | Suddenly I was being unable to reach any website. Firefox on my iPhone told me, it would being unable to establish a secure connection. So I have switched off eBlocker. Instantly all internet connection worked well as expected. So, I was looking at the eBlocker Doctor. There was a red marker at the DNS topic. Due to avoid the small display of the iPhone I took my MacBook, opened the eBlocker configuration site. But now, the DNS topic was marked in green. Back to the iPhone everythink worked well again. Where can I find what has happened when the DNS topic ... |
| Problems by visiting Thalia-Website with eBlocker | Relevance | 4 Jahren ago | Simon | Bugs & Issues |
| | Hello together, since a few weeks I have problems when I visiting the website . The website is normally displayed correctly, but for a short time now the website has only looked very limited when the eBlocker is active. The graphics are no longer displayed at all, leaving only the text on the page. I haven't changed any settings on the eBlocker, which explains the problem. What can I do here without having to add the website to the exception list? Attachment : Bildschirmfoto 2021-11-13 um 12.47.42.png |
| Why are important tips & hints for the configuration without any explanation | Relevance | 4 Jahren ago | Superblond | eBlocker Open Source Forum |
| | Hello eBlocker users!First of all: The installation on the RasPi was -as promised- easy and without any problems. But what I don't understand is: Why are important tips & hints for the configuration of the RasPi, the eBlocker or the router simply given without any explanation. Example: Txt&Video: Enable DHCP in the eBlocker and disable it on your router!OK, but why should I do it this way? What is better then? Example: Turn off IPv6 on your router!Aha, but why should I do that, how does that help me? Can someone make me a complete n00b & amat ... |
| JS-Restrictor (Firefox) together with eblocker | Relevance | 4 Jahren ago | TuXXer | eBlocker Open Source Forum |
| | Hi, on www.privacy-handbuch.de I found the recommendation to use JS-Restrictor ( with Firefox as one module to improve privacy. Is there something similar in eblocker? Is it recommendable to use this extension together with eblocker? Brgds |
| VPN perfect-privacy | Relevance | 4 Jahren ago | Bastet | Bugs & Issues |
| | Good day,so far the VPN service from perfect-privacy worked perfectly in eBlocker.Despite re-recording the ovpn server profiles matching the eBlocker (from the download page of the VPN provider), this is no longer the case. TOR however works.The VPN manager available from the VPN provider works correctly under my current Win10.What could be the cause?Could it be that the eBlocker updates are the cause for this? Thanks for any hints.Bastet |
| Redirect internet sites to alternatives with more privacy | Relevance | 4 Jahren ago | TuXXer | Features & Priorities |
| | There are i.e. Firefox extensions like Privacy redirect existing that redirect certain pages to more privacy friendly alternatives. Twitter -> Nitter Youtube -> Invidious Instagram -> Bibliogram Google maps -> Openstreetmap We can also think about redirecting certain search engines to more privacy oriented (i.e. Google -> Ducuduckgo). Some other Privacy boxes already provide this functionality. It would be nice to see that also in eblocker! |
| eBlocker VPN > eBlocker Annonymization | Relevance | 4 Jahren ago | facebita | Bugs & Issues |
| | I want to conntect remotely via eBlocker mobile with my router at home and then I want to use the IP annonymization configured on my eBlocker to connect via Tunnelblick VPN with my remote desktop in the office. When I within my WLAN I can easily connect via IP annonymization establish this VPN connection. But will it work, when I conntect first from outside onto my eBlocker? |
| parental control for distinct domains with time limits | Relevance | 4 Jahren ago | Ill0 | eBlocker Open Source Forum |
| | Hello all, I was wondering, if I am able to configure parental control on domain level, which is obiously really needed. But I couln't find that kind of logging and filtering. I recently activated the parental control one of my "white cubes" (Family license, v2.7.4). I looked for the ability to select distinct domains to set time limits on, e.g. 1. youtube.*: 30 min/day,2. teams.microsoft.com: 3 h/day (for home schooling/home work)3. WhatsApp: 30 min/day4. etc... Just to set an overall time limit for a day and just exclude domains at all by creating on d ... |
| Mail.app in macOS // Load remote content | Relevance | 4 Jahren ago | facebita | eBlocker Open Source Forum |
| | On macOS 11.6 I have Mail.app configured to not load automatially remote content into emails. But, if eBlocker is activated, and I click in Mail.app on the button load remote content, images won't be displayed in the email body. What I have to do in order to get Mail.app working as with no eBlocker? |
| https-Certificate in Firefox macOS | Relevance | 4 Jahren ago | Simon | Bugs & Issues |
| | Hello together, I set up the eBlocker for a friend and now have the problem that I cannot save the https-certificate in Firefox. Apple's browser accepts the certificate without any problems. Could it be that some addons can cause problems here? In my opinion, it cannot be due to the antivirus program, because then it should not work under Safari. Any ideas?? -Thanks! |
| eBlockerPro - blank window | Relevance | 4 Jahren ago | Arvi | Bugs & Issues |
| | Hi, I have since 2 days a problem with my eBlockerPro. It no longer works and when I try to log in comes only the (fixed) IP address of the eblocker/settings (192.xxx.x.xx/settings) and nothing happens - a blank window. I also tried to reset the eblocker with USB stick (FAT32 formatted) with an empty file named “eblocker-factory-reset.txt” on the USB stick, unfortunately without success. The icon on the right edge does not come either. In the router I can see the eblocker that In the router I can see the eblocker, which gets an IP address. Does anyone have ... |
| PDFW does not show any entries | Relevance | 4 Jahren ago | TuXXer | Bugs & Issues |
| | Hi, I tried to test PDFW, but PDFW never shows any entries. Also when I refresh or generate traffic. I also tried the Chromium Browser without success. Attachment : Screenshot 2021-08-27 at 20-26-04 eBlocker Dashboard.png Additionally when I refresh the page the PDFW is switched off! |
| Testing AVM Products | Relevance | 4 Jahren ago | Pio78 | eBlocker Open Source Forum |
| | Hi everyone, redesigned my homenetwork 🙂 🙂 Fritzbox 6591 Fritz!repeater 1200 (Lan bridge mode) 👍 TP Link Switch ... eBlocker in "Individual-Mode",with DHCP; Fritzbox DHCP OffStatic IP for OpenVPN with eBlocker more will follow ... 02.08.2021 - Fritz!Repeater 600 (nur wenn eBlocker im Networkmode "Individual" !!!) 👍 regards PIO78 |
