| # | Post Title | Result Info | Date | User | Forum |
| Worthy successor for the White Cube? | Relevance | 7 Monaten ago | Julius | eBlocker Open Source Forum |
| | Hi, unfortunately my White Cube has now stopped working. It lasted a long time 🙂 I would like to ask carefully when we can expect a version for Raspberry 5, because when I buy new hardware, I tend to buy the more powerful & long-supported product. The price difference is not that significant for me.I would also test a beta image... |
| can not update to 2.5 with white cube | Relevance | 7 Monaten ago | enemymine | Bugs & Issues |
| | I Just reactivated my old white cube and I'm using eBlockerOS 2.4 behind a fritzbox 7590. I reset it to factory setting and was able to got through the initial setup process. No I'm stuck with the Update. When trying to update to 2.5 the Lightbox popup seems to fail when loading the term of service and therefore I can not initiate the process. See att. screenshot Attachment : image.png |
| ChatGPT | Relevance | 7 Monaten ago | RobF | Bugs & Issues |
| | I thought eBlocker was running smooth and easy, until Attachment : IMG_0083.png Looks OK; the next screens equally OK Attachment : IMG_0084.png but then ... Attachment : IMG_0085.png opening the ChatGPT-app resulted in above message (no need the translate the Dutch wording i guess 😏 What happened here? Regards, Rob |
| Reuters | Relevance | 8 Monaten ago | RobF | Bugs & Issues |
| | When i try to read the Reuters-app on my iPad, i get the following screen Attachment : IMG_0067.png Without eBlocker or when eBlocker is paused, the app works OK After allowing all blocked addresses in the Personal Firewall (Dashboard), i still get the message shown. When Recording Manually (Settings/HTTPS) and after i got that same message and stopped the recording, there is no result at all. Every possible checkmark that can be green IS green. Anybody some good ideas? |
| RCS being blocked | Relevance | 9 Monaten ago | jbrunerwa2 | eBlocker Open Source Forum |
| | I'll add all the diagnostic / configuration information if needed. First, I'd like to see if others are seeing problems sending RCS messages? I'm able to send if I pause but not with the blocker fully enabled. Anyone else? |
| Firefox 131.0.3 Error: connection failed | Relevance | 9 Monaten ago | andisa | Bugs & Issues |
| | Since some weeks I get the following error message, when I try to open the eBlocker dashboard: Error: Connection failed An error occurred while connecting to 192.168.xxx.xx. The website may be temporarily unavailable, please try again later.If you are also unable to access another website, please check the network/Internet connection.If your computer or network is protected by a firewall or proxy, please make sure that Firefox is allowed to access the Internet. The same message occures, when I use the Brave Browser. In both browser the eblocker icon is n ... |
| facebook | Relevance | 9 Monaten ago | RobF | eBlocker Open Source Forum |
| | Hi everybody, When i include the adres 'star.c10r.facebook.com' (and its siblings 'star-mini.c10r.facebook.com' and 'star.fallback.c10r.facebook.com') in 'Dashboard/Block Domains', these addresses are blocked as intended on the device concerned. I tried several methods (URL List / easylist), (Maintain own list / Provide download URL) to include these addresses in 'Settings/Blocker/Pattern Tracker Blocker', but i didn't manage to get eBlocker to block these addresses in this way. I'm not sure i used the correct (easylist-) format or made other mistakes. Co ... |
| Check alternative "captive portal" | Relevance | 1 Jahr ago | pe1aqp | Features & Priorities |
| | My telephone uses (or, tries to use) an alternative "captive portal" ("connectivity.ecloud.global" instead of "connectivitycheck.gstatic.com"). It would be nice if my eBlocker could also check for this alternative. I don't see a way to set the captive portal, or to add another in addition to the google address. (Of course, it would be best to be able to add an alternative, so that the google one is still checked.) |
| [Howto] recycle White Cube | Relevance | 1 Jahr ago | ObiTwo | eBlocker Open Source Forum |
| | Dear Community, May I ask for your advice? It's about a potential recycle option of the white cube. Context: After the recent survey the eBlocker team had launched, I thought about it and realized that only switching to a current Raspi is a future-oriented decision. So I have now replaced the white cube with the current eBlocker image on the new Raspi. As expected, it's working perfectly. But now I don't want to simply throw the 5-year-old white cube with banana pi to the bin. I see it as a possible further use as an experimental computer for ... |
| Weißer Würfel Umfrage (German only) | Relevance | 1 Jahr ago | Benne | Community Polls |
| | (This poll addresses only users in the German spoken countries.) Diese Umfrage richtet sich ausnahmsweise nur an deutschsprachige Nutzer. |
| eBlocker https | Relevance | 1 Jahr ago | vnn | eBlocker Open Source Forum |
| | Hello alle of you, my eBlocker cube Version 3 works so well and he blocks very well. However there is a issue with the https. I extract the certificate from the device and import this into the operationsystem in Linux and WIndows. If I visit a webpage that it isnt in the list I get aa message that the controlbar has denied the conection and I can't see anything. When I add this into the list access to the site is available but the controlbar dooesn't show up. Is there an issue in the Beta Version 3? Also I wondered that I have only access to the eblocke ... |
| eBlocker does not block Google and YouTube | Relevance | 1 Jahr ago | Selein880 | Bugs & Issues |
| | Dear ladies and gentlemen, My original cube-shaped eBlocker doesn't block trackers and ads from Google and YouTube reliably or at all. Last night he didn't block any ads from Google and YouTube. And today I don't know, does it block advertising and trackers from Google and YouTube? This has been a big issue for me since I stopped subscribing to YouTube Premium. I have reset the eBlocker to factory settings twice in the last few days. I also did several restarts, but they had little or no effect. Thank you for any help Affected is my main device! |
| reCAPTCHA | Google for Developers | Relevance | 1 Jahr ago | RobF | Bugs & Issues |
| | As some of you may recall, I detest Google and the question I have only has to do with eBlocker on the sideline. Apart from this issue, my white cube with eOS 3.0.3 works flawless. When trying to login with my hosting provider Cloud86 ,I can't get in as long as eBlocker is switched ON. Reason: they use reCAPTCHA to provide a ' Save login'. IMHO this is "go to the confession with the Devil". Of course I could Pause eBlocker during login. Hm... Or include the relevant connections in a 'safe' app. Hm... |
| Apparent discrepancy on the dashboard (version 3.02) concerning the presence of the certificate | Relevance | 1 Jahr ago | adaeweritz@t-online.de | Bugs & Issues |
| | Along time ago, I started to use eBlocker in the form of the white cube. When the cube failed to accept a further update I installed the eBlocker software on a Raspberry 4 and continued my computer life with this eBlocker. Then I learnt to reactivate the white cube by installing an SD-card and returned to the cube. Since then I keep both eBlockers up-to-date (the Raspi as a spare fall-back version). Presently, eBlocker’s OS version is 3.0.2. Now to the reason for this mail: Last month, I transferred my mac-system from an iMac 27“ (Big Sur) to a new Mac St ... |
| Standard settings template for Fritzbox 7590 | Relevance | 2 Jahren ago | ObiTwo | Bugs & Issues |
| | Dear community, may I ask for your support? I have been using: Fritzbox 7590 AX on a fiber optic modem since 27.12.2023.The fiber optic is provided operationally by Telekom.My provider is Vodafone.My eBlocker is the white cube with eBlocker OS 3.0.1 All Fritzbox settings were restored from a backup when the 7590 was first set up. The backup came from the Fritzbox 6591 Cable which was previously in reliable use with eBlocker.The now active 7590 AX has IPv6 activated. Problem: the eBlocker function test shows an error message at 'DNS Firewall' : Your device ... |
| Original eBlocker version (from inception 7 years ago) never activated | Relevance | 2 Jahren ago | CBR | eBlocker Open Source Forum |
| | Is the hardware version I have still operable? It is the original lifetime version. Due to certain events and life challenges, I never used my original eBlocker. --->Actually, it's still in the mailing package unopened. I have everything that was initially sent to me. I've been reading the eBlocker site & have downloaded the original manual. I realize it may have to go through many updates. Is it possible? Adding that it's simply for home use. I have an old Mac which I plan to replace but not yet. |
| eBlocker and additional AVG Internetsecurity: to what extent is this superfluous? | Relevance | 2 Jahren ago | Bastet | eBlocker Open Source Forum |
| | In addition to the eBlocker, I have installed "AVG Internetsecurity". Irrespective of the fact that this software is intrusive, I fear that, similar to unfavorable Firefox settings (e.g. DNS via HTTPS not deactivated), some of the many options of the above-mentioned AVG software also restrict the functions of the eBlocker with superfluous settings. For example, is the antivirus function also superfluous and, if so, which ones?- In the hope that one or the other is familiar with the software 😥 txs |
| Backup broken under 3.0.1 | Relevance | 2 Jahren ago | RobF | Bugs & Issues |
| | Since the update to eBlockerOS 3.0.1, I can't find the backup file made by Settings/System/Backup in the download folder. This is true for my iPad and my iMac. Last time I made a backup was November 12th and had no problem then. Tried it several times and downloaded files from various internet sites, just to make sure that the download-location was unchanged. As always, I can't exclude my own errors 😉 Rob |
| DNS curiosity | Relevance | 2 Jahren ago | RobF | eBlocker Open Source Forum |
| | Dear gentlemen, Would anyone care to explain the following. The eBlocker and internet access work as they are supposed to do and eBlocker is set as DNS server with a custom list of external servers as shown below Attachment : IMG_2377.png The Cloudflare server 1.1.1.1 normally shows a green checkbox mark, but for some reason (?) it doesn't do so now. The Quad9 server 9.9.9.9 didn't show a green checkbox mark since a long time (weeks/months!). Now, i just wander how the eBlocker is choosing between these 2 servers or any other additional server ( ... |
| Newsletter & eBlockerOS for PCs | Relevance | 2 Jahren ago | Random | Official Announcements |
| | Yesterday, we published our latest newsletter covering: eBlockerOS 3 coming before Christmas eBlockerOS for booting on a PC YouTube ads get blocked well with eBlockerOS Certificate expiration hint more German newsletter English newsletter |
| Lacking some green checkmarks after initial setup | Relevance | 2 Jahren ago | FF44 | eBlocker Open Source Forum |
| | Attachment : IMG_5069.jpeg Attachment : IMG_5074.jpeg Attachment : IMG_5068.jpeg Attachment : IMG_5067.jpeg Attachment : IMG_5071.jpeg Attachment : IMG_5076.jpeg Attachment : IMG_5075.jpeg Hey, After a little break I am back as a donator. As my „weißer Würfel“ refused to boot I followed your guide and flashed an external SD to get it going again. Booted and followed the initial setup steps until where it says „make sure all checkmarks show green before you continue“. I keep lacking three green che ... |
| pause via URL | Relevance | 2 Jahren ago | pe1aqp | eBlocker Open Source Forum |
| | I have on one of my computers a (bash-)script that does some internet access via wget (or curl or similar). When running this script, I have to manually hit the eblocker pause button. It would be nice if this script could set/unset pause, for example via a URL (for example, something like: "wget e"). Perhaps this is already possible, but I cannot find it in the docs. If it's not, it would be a nice addition |
| Missing map on Electricity Maps | Relevance | 2 Jahren ago | jogi | eBlocker Open Source Forum |
| | Hello at all, why is the map not displayed on Attachment : Firefox01.jpg Is this an eBlocker issue, can someone jump in and help please? Many Thanks! |
| Consent & Cookie-Banner Blocker | Relevance | 2 Jahren ago | jogi | eBlocker Open Source Forum |
| | Hello all, is there a possibility to create an eBlocker filter similar to the browser extension "I don't care about cookies" ( Thanks for help. |
| Understanding question when using two subnets | Relevance | 2 Jahren ago | Joe | eBlocker Open Source Forum |
| | Hi, Subnet A is the network to the internet and the WLAN. Subnet B is the network secured by eBlocker. I have limited the end devices to the most necessary for the question. Subnet A 192.168.30.nRouterA IP 192.168.30.30RouterB 192.168.30.50Notebook 192.168.30.80 / Gateway 192.168.30.30 Route 192.168.100.0 - 192.168.30.50 Subnet B 192.168.100.nRouterB IP 192.168.100.100eBlocker 192.168.100.20 / Gateway 192.168.100.100NAS 192.168.100.70 / Gateway 192.168.100.20 The NAS (http-site) can not be accessed from the notebook, although ping and tracert are succes ... |
| eBlocker Wifi conenction issue with gstatic.com | Relevance | 2 Jahren ago | BenBen24 | Bugs & Issues |
| | Hi, I have the problem that eBlocker blocks my wifi connections in my home network, see screenshot. I lived with it for quite some time, but now I have a new Fritzbox and a new android phone - and it happens again. So I think it is the eBlocker after all. But the problematic URL "gstatic.com" is in eBlocker's trusted website list, so why is eBlocker complaining? Does anyone have an idea what is the cause? Attachment : 13-03-_2023_19-14-28.png |
| Original White Cube from early days still suitable? | Relevance | 2 Jahren ago | psvirtual | eBlocker Open Source Forum |
| | I've been one of the early supporters of the Kickstarter Project and got one of the first available white cubes these days.I stopped using it a few years ago... Question: Is this hardware (no idea what was exactly in the box these days) still powerful enough to run the current versions or would you recommend to get a state of the art Raspberry? Thanks! |
| Eblocker does not update to 2.10 from 2.9.1 | Relevance | 3 Jahren ago | Evel Knievel | Bugs & Issues |
| | After reading about an update for the original white Cube to 2.10, while runnung 2.9.1, I went on manual update. It finds 73 update files. After hitting the button update, it tells that it needs about 20 min, then the browser switches to preparing update and accessing eblocker, stays on 0 % and tells reboot eblocker and update page. After that you are back on start (Version 2.9.1, press manual update, search,.........) Process takes about 1 min and can be persitant repeated. Internet access is with a Fritzbox 7590 with Firmware 7.50. Never had this with any ... |
| Bug while restoring config file | Relevance | 3 Jahren ago | CalimerO | Bugs & Issues |
| | @bpr There is no progress bar showing the restore process and when it is finished. If you change the site from the restore to any other, you brick the still running restore process. Can someone confirm this bug? Regards |
| Can't access eBlocker after power interruption | Relevance | 3 Jahren ago | ChrisMIT | Bugs & Issues |
| | I interrupted the power of my eBlocker (white cube) at the beginning of January after I couldn`t reach the web interface via browser. I wanted to add a website to the exception list. Then I forgot to reconnect the cube for a few day. When I got the email with the information about the 2.10 update I remembered the eBlocker and reconnected it with the power again. Since then it seems to be that the eBlocker does not boot properly again. My Environment: - FritzBox Cable 6490 (192.168.0.1) with DHCP enabled for IP4 (from .0.160 until 0.240)- FritzBox IP6 networ ... |
| MEGA-app and SSL | Relevance | 3 Jahren ago | RobF | Bugs & Issues |
| | I'm using the MEGA-app on my iPad. When using the eBlocker and starting this app, i get a message as shown below (MEGA can't connect via SSL). Attachment : D5939745-FC2A-4A17-A27D-CAD572F49AA1.png To connect anyhow, i can 1. disable/pause the eBlocker 2. deactivate eBlocker's HTTPS support in the dashboard In the list of trusted apps i found 'Mega.nz' with the domains mega.nz, mega.co.nz and mega.io, but these settings don't prevent the behavior as described above. Using the manual HTTPS diagnostics (recording) didn't give further clues. Otherw ... |
| Individual Network Settings | Relevance | 3 Jahren ago | RobF | eBlocker Open Source Forum |
| | My eBlocker works just fine in Automatic Mode and that's the only remark for 'experts' that is made by the Doctor. So, my family is fully protected as intended. Now, lets use the Individual Setting and assume i'm on a business trip, divorced or even deceased and there is a problem with the network inside or outside of the home network. Unplugging and reconnecting the router (standard solution) could work if the problem is within my own network, removing the eBlocker doesn't help either (members of my family or a service technician from the ISP don't know wh ... |
| eBlocker mobile questions | Relevance | 3 Jahren ago | RobF | eBlocker Open Source Forum |
| | Hi, Haven't been around on this forum for quite some time, but would appreciate if somebody could and would give a hint. Got a fixed IP-address from my ISP, disabled IPv6 in my FRITZ!Box 7590 and set up portsharing according to 'The eBlocker Mobile Function' instructions in the online eBlocker user manual. However, neither the test in eBlockers settings (see screenshot) nor a site like 'Open Port Check Tool' (canyouseeme.org) can detect an open port. Have been using eBlocker Mobile in the fast, but since it was no longer possible to use it i stopped usin ... |
| eBlocker mobile - https diagnosis | Relevance | 3 Jahren ago | jogi | Bugs & Issues |
| | Hello eBlocker Team,I noticed that I cannot use the manual https diagnosis via the eBlocker mobile connection.Why is that? |
| eBlocker function test: Web filtering (HTTPS) failure on iOS eBlockerOS 2.9.1 | Relevance | 3 Jahren ago | ruky | Bugs & Issues |
| | Hello, I have been using eBlocker on iMac, iPad and iPhone for a long time (Rasperry PI) and I use the Safari and the Firefox browser. Unfortunately, I can't get rid of the Web filtering (HTTPS) error in the Dashboard function test. After a new implementation based on the eBlocker Box, a DNS firewall error is now added. Attachment : image.png The error occurs with all devices and with both browsers. As a router I have a Fritz.box 7590 also on current software status like all other devices. I have restarted all devices several times. C ... |
| eblocker cube doesn´t work | Relevance | 3 Jahren ago | CA87 | eBlocker Open Source Forum |
| | Hey, my cube doesn't work anymore. I can no longer access the cube via the browser. also in the Fritz box is not indicated. What can I do ? |
| eBlocker Mobile APP & Open VPN | Relevance | 3 Jahren ago | pidiboy1 | eBlocker Open Source Forum |
| | Hello Support TeamI have not been able to make an Open VPN connection for a few days (weeks). I have installed the app Open VPN on my IPhone and IPad and that had been working for months now without any problems. I have not made any changes to the firewall or eBlocker in the last few months. Everything already restarted several times . I have already deleted and recreated the configuration several times without success. Unfortunately no one in the German forum could help me either. I get on the app for Windows an error message in the log. Thanks Pit Att ... |
| Help setup white cube | Relevance | 3 Jahren ago | Maitschel | Bugs & Issues |
| | Hi. I bought an originally packaged eBlocker Cube and unfortunately I can't get it to work. I've been waiting for the first 5 minutes several times, but the setup.eblocker page doesn't change and I don't see a logo in the top right corner either. Could someone please help me? Thanks |
| Zoom does not work - again and again query: "Windows Security" username and password ... | Relevance | 3 Jahren ago | eblocker-fan | Bugs & Issues |
| | With your post please always report Hardware you use for running eBlockerOS-> MACBOOK PRO with WINDOWS 10 eBlockerOS version as well as filter lists version-> eBlockerOS version, 2.9.1, eBlocker blocking lists version 2022-06-08-12-58-25 eBlocker network mode (auto, individual or expert)-> expert Which devices runs DHCP server? Router/external, eBlocker or client fixed IP?-> eBlocker IPv6 disabled for client/network?-> disabled Client browser and OS version (i.e. FireFox 80.1 running on macOS 13.4)-> FireFox 101.0 and 97 My problem i ... |
| Squid Update needed | Relevance | 3 Jahren ago | Paddyk | Bugs & Issues |
| | The used squid in eblocker is oudated. Please consider an urgend upgrade of the component.There are several CVEs realated to the used version: CVE-2020-11945, CVE-2019-12519, CVE-2019-12524, CVE-2019-12526, CVE-2020-11945, CVE-2019-12524 are the critical ones. I have also 10 high rated ones...Eblocker should increase security and not compromise it |
| RE: private fixing service for white cube users | Relevance | 3 Jahren ago | runningman74 | eBlocker Open Source Forum |
| | Attachment : 20220504_122858.jpg Attachment : 20220504_122904.jpg Hello! I have a problem with my original eblocker white cube. I connected it with TV screen and took some pictures of booting process. Anyone knows a solution for the problem? Thx in advance! Markus |
| Manual update "White cube" does not work | Relevance | 3 Jahren ago | steffentaube | Bugs & Issues |
| | As I had to discover, since version 2.8.2 the manual update no longer works. When checking for updates, it tells me that new files are available. If I start the update process, it looks like it is started, but after a very short time it shows that it is finished, but no update was really made. I noticed this when I tried to update to version 2.9. 26 files are displayed for me to update, but nothing changed after the update attempt. I therefore need your help. Attachment : Bildschirmfoto 11.png Vielen Dank. |
| Issue after Update 21..04.2022 | Relevance | 3 Jahren ago | hatutau | Bugs & Issues |
| | eBocker White Cubeconnected with LAN cable to Vodafone FRITZ!Box 6591 Cable KI Up to now the eBlocker worked perfectly. Since the update tonight, it can no longer be reached via the old IP address and is no longer listed in the Fritzbox network.I have reactivated the DHCP of the Fritz Box and restarted the Fritz Box and eBlocker. The LEDs are flashing, but nothing has changed. What can I do? |
| Use of eBlocker Mobile & power consumption | Relevance | 3 Jahren ago | jogi | eBlocker Open Source Forum |
| | Hello all, I use eBlocker Mobile daily via OpenVPN at Android. What options do I have to save battery? The app has a very high battery consumption. Thank you |
| Problem with internet access after Fritzbox parental controls change | Relevance | 3 Jahren ago | PJK | Bugs & Issues |
| | Dear eblocker team, have current SW on the e-blocker in auto mode and had to change the parental controls on Fritzbox 7590 with current Fritz OS. Fritz.box DHCP enabled and working. I haven't had internet access since then, but WiFi works fine internally. When eblocker is off, everything works as before, but of course without the eblocker advantages. Have already reset each device and refigured eblocker from/back to auto mode (it finds Fritz DHCP server without any problem). I just can't access the Internet on no device (Windows, Android) with the ebl ... |
| Original White Cube Update from eblocker OS 2.5.6 not successful | Relevance | 3 Jahren ago | RuMaHu | Bugs & Issues |
| | Hallo, would like to reactivate my eblocker again and migrate to latest OS version. If I try to manual update - there are 89 updates displayed (see the sceenshot below) - I can start the update process and it starts with displaying the update progress with 0% - a short time later the update process ends without an error, but the update wasn't done - if I try to do it again and again - exactly the same behavier like described obove Attachment : image.png I would like to support eblocker development with monthly donations, but therefor I need ... |
| Documentation - Library | Relevance | 3 Jahren ago | Anonymous | eBlocker Open Source Forum |
| | Don't remember how i got it, but i have a PDF "eBlocker Open Source ProjectTechnical Background & Core Architecture, 31 January 2020". Makes good reading. Is an update available? Searching the net, i also stumbled upon the document "Wie Profilbildung im Netz funktioniert, 13. März 2021". Is there a "library" somewhere on the Net where users of eBlocker or people simply interested in this 'privacy-machine', can find interesting reading in various languages? Rob |
| Quick access to Dashboard on Mac | Relevance | 3 Jahren ago | Anonymous | eBlocker Open Source Forum |
| | Whenever i start Safari, especially after a reboot, it takes more time than i'm willing to wait before the eBlocker GUI is shown. To circumvent this issue, i use a Menu Bar Browser shown below. The moment i click on the eBlocker logo in the Menu Bar, the GUI is available. For this i use the app MenuBarX ( available in Apple's App Store. Rob Attachment : shot.png |
| eBlocker Mobile not working | Relevance | 4 Jahren ago | Anonymous | eBlocker Open Source Forum |
| | @random Before dealing with the topic, i want you to know that i regret the friction we had during our last encounter. On this forum you are - as far as i'm concerned - the boss and i therefore seriously intend to stick to the 2 rules shown below. Attachment : AAFB6C7B-2C2A-4120-A85C-72012514BE4E.jpeg Both on my iPhone and my iPad i tried to use Mobile in conjunction with my FRITZ!Box 7590 and the app OpenVPN, version 3.2.3. Tests stipulated an OK Attachment : 13C68F87-FCDD-400A-876E-0EB17E72FB41.png Attachment : 3DCDF57C-6FD1-4C03- ... |
| Doktor in eBlocker: ip6 | Relevance | 4 Jahren ago | Bastet | Bugs & Issues |
| | Hello,the function "Doctor" in the eBlocker returns the message, ip6 is not activated. This although in my Fritzbox 7490 the ip6 protocol was enabled and my ip6 address could actually be determined. Meanwhile I deactivated ips6 in the fritzbox until the eBlocker can ip6. |
| eBlocker and Teufel / Raumfeld-System | Relevance | 4 Jahren ago | Stefan_Thomas | eBlocker Open Source Forum |
| | The eBlocker interrupts the stream of my Teufel / Raumfeld multiroom streaming system. What settings need to be changed so that the system works smoothly again? |
| Blick.ch APP iOS not Work | Relevance | 4 Jahren ago | CHRvE | Bugs & Issues |
| | Hello, i can't open the BLICK.CH APP in iPhone 12Pro (All iOS Versions) When i start the app, pop's on and closed afther 1-2 sec. Only whan i disable WERBE Blocker runs fine. With Https Verbindungfehler i not see any links/port i must manually open. Thanks |
| certificate outdated | Relevance | 4 Jahren ago | JoergH | eBlocker Open Source Forum |
| | After some time, I have connected the eBlocker to my network again and last night it also installed the updates. But now I have the problem that on the one hand my iPad no longer opened or updated any apps and emails were not sent. The iPad always said that the eBlocker certificate was not correct. On my Windows notebook, no website opened either and I didn't receive any e-mails either. Then I removed the eBlocker from my network and everything worked again. But I would like to use the eBlocker and the security functions. What do I have to do so that I can s ... |
| eBlocker (Cube) doesn't show any reaction | Relevance | 4 Jahren ago | sasant | Bugs & Issues |
| | Hi there, after a while I've tried to reactivate my former licensed eBlocker but it isn't showing up in my network.So the network-activity LED are showing orange: flashing with approx 2second pause, green: various activity. In Fritz 7590 network overview the eBlocker doesn't show up also. I've tried with several computers (Mac 10.14 and 10.15 and Win10) and browsers (Safari, Firefox, Opera). Cache has also been deleted. So are there any other ideas? Is there an opportunity to reinstall any other (newer) eBlocker OS to the cube? I'm going to have a yearly s ... |
| Ads in relation to VPN | Relevance | 4 Jahren ago | Anonymous | Bugs & Issues |
| | Not sure whether this is a new issue or not. To start with, i made sure that IPv6 is disabled in my FRITZ!Box. When anonymized trough the eBlocker, using a PIA-ovpn.file, i see Google-ads as shown below Attachment : 6F165DA7-DD15-42A1-9CE7-DFDC3C44F7B9.png Attachment : F8EC0C59-AA94-4248-B9EC-06AB0B3002D4.png When not using eBlockers anonymization, the ad disappears, equally as shown below Attachment : 7B6D2C3A-6592-4107-966F-9CAA20291969.png Attachment : 6B67ABC9-8567-42AF-86BB-3254502F56BF.png Is there a way to alway ... |
| VPN perfect-privacy | Relevance | 4 Jahren ago | Bastet | Bugs & Issues |
| | Good day,so far the VPN service from perfect-privacy worked perfectly in eBlocker.Despite re-recording the ovpn server profiles matching the eBlocker (from the download page of the VPN provider), this is no longer the case. TOR however works.The VPN manager available from the VPN provider works correctly under my current Win10.What could be the cause?Could it be that the eBlocker updates are the cause for this? Thanks for any hints.Bastet |
| Fritz Repeater 1750E | Relevance | 4 Jahren ago | Anonymous | Bugs & Issues |
| | AVM Fritz Repeater 1750E Repeater as LAN bridge Could somebody please explain what it means in the 'Compatibility Hardware list' that the repeater is "Manually compatible" and "as LAN bridge"? Does it mean that the repeater is not compatible when simply used as a Wireless range-extender? Thank you, Rob |
| parental control for distinct domains with time limits | Relevance | 4 Jahren ago | Ill0 | eBlocker Open Source Forum |
| | Hello all, I was wondering, if I am able to configure parental control on domain level, which is obiously really needed. But I couln't find that kind of logging and filtering. I recently activated the parental control one of my "white cubes" (Family license, v2.7.4). I looked for the ability to select distinct domains to set time limits on, e.g. 1. youtube.*: 30 min/day,2. teams.microsoft.com: 3 h/day (for home schooling/home work)3. WhatsApp: 30 min/day4. etc... Just to set an overall time limit for a day and just exclude domains at all by creating on d ... |
| eBlocker works, but Settings page is blank after update to latest version (2.7.7 I guess) | Relevance | 4 Jahren ago | mr.bien | Bugs & Issues |
| | Hi, I just manually updated to the latest version of eBlockerOS. I guess it was 2.7.7 (where can I trace this if the settings-page is not available?). eBlocker works, the dashboards work, but accessing settings just shows a blank page. Also things like the https-Wizard cannot be accessed. So I guess everything what is accessed over settings cannot be opened. When I installed the update I was not able to access eblocker for around 90mins until I unplugged it from power. After reboot, eBlocker works in general, but settings page is gone. Everything else seem ... |
| eBlockerPro - blank window | Relevance | 4 Jahren ago | Arvi | Bugs & Issues |
| | Hi, I have since 2 days a problem with my eBlockerPro. It no longer works and when I try to log in comes only the (fixed) IP address of the eblocker/settings (192.xxx.x.xx/settings) and nothing happens - a blank window. I also tried to reset the eblocker with USB stick (FAT32 formatted) with an empty file named “eblocker-factory-reset.txt” on the USB stick, unfortunately without success. The icon on the right edge does not come either. In the router I can see the eblocker that In the router I can see the eblocker, which gets an IP address. Does anyone have ... |
| Support for Speedport 3 | Relevance | 4 Jahren ago | frseuberth | eBlocker Open Source Forum |
| | Hello, i can't use my eblocker with my Telekom speedport 3. I installed the newest update. The DNS-Firewall isn't working, and so the blockers aren't working too. Does anyone has a solution? Thanks! |
| Update from 2.4.5 to 2.7 not working | Relevance | 4 Jahren ago | Mahakala | eBlocker Open Source Forum |
| | Hi, I just donated for Daily Updates and wanted to activate it. I read the Information, that os2.5 is needed and os2.7 is available. But i am not capable to Update and i don‘t know why. When i try to update manually, it sais, that 2.45 is the actual Version. Einstellungen - Lizenz und Aktualisierung - manuelle Aktualisierung doen‘t work. what am I doing wrong? Regards, Mahakala |
| Personal Device Firewall shows ads.domainblockercheck.eblocker.org | Relevance | 4 Jahren ago | Anonymous | eBlocker Open Source Forum |
| | Just curiosity… What is ‘ads.domainblockercheck.eblocker.org’ and why is it blocked?Rob Attachment : 70219338-47BC-473E-B2C6-FFED740C1E07.jpeg |
| Donor license | Relevance | 4 Jahren ago | Anonymous | eBlocker Open Source Forum |
| | Tried to enter my donor-licence-key under eOS 2.7.4 (Settings/License/ACTIVATE NEW LICENSE, accepting the EUPL, pasted my donor-license-key and filled the email-box) As i still see ‘License type eBlocker Family’ and ‘Activated on 8 march 2021’, i must assume something went wrong or … i did something wrong. regards, Rob |
| Can’t Pause Device | Relevance | 4 Jahren ago | Anonymous | eBlocker Open Source Forum |
| | No idea how i got here, but both on my iPhone and on my iPad the ‘Pause’ got stuck. In the Dashboard, tapping Pause and ‘PAUSE EBLOCKER FOR THIS DEVICE’ doesn’t show any response. In Setting/Devices/DEVICE LIST/ for iPad and iPhone, tapping ‘eBlocker not paused for this device’ makes the switch change from grey to red, but only during a split-second (jumps back) and afterward the swich keeps ‘twitching’. I made a screen-recording for both devices. My iMac with Big Sur 11.5 doesn’t show this behavior. Greetings, Rob Attachment : 3CD94646-783D-431A-AE ... |
| Issues receiving emails/newsletter | Relevance | 4 Jahren ago | Joe | eBlocker Open Source Forum |
| | Since 2021 I no longer receive the newsletter email. There are no spam filters or similar set. The email address has not been changed.I receive the emails "instructions for bank transfer" and "you have been mentioned in forum post" as usual.However, this morning I received a request by email to select the newsletter language. |
| Individual network mode / assign same IP | Relevance | 4 Jahren ago | Anonymous | eBlocker Open Source Forum |
| | In expert mode there is an option to always assign the same IP-address to various devices. In Individual mode there is no such option; what is the status of the IP’s? Thank you |
| Compatibility Fritzbox 7590? Works well! | Relevance | 4 Jahren ago | Anonymous | eBlocker Open Source Forum |
| | I’m under the impression that the FRITZ!Box 7590 is a popular router and it’s behaving well, at least with my (white cube) eBlocker. Why is it not mentioned in the compatibility-list? Rob |
| Only “Domain Blocker not used” OK | Relevance | 4 Jahren ago | Anonymous | eBlocker Open Source Forum |
| | iPad 5th gen. IPadOS 14.6. eOS 2.6.2 Both iPad and eBlocker rebooted. Status shows info as per enclosed picture. Change (from normal and perfect behaviour) came out of the blue. Reboot didn’t change anything. Attachment : E5C3CACC-7275-432D-B574-303807F522EF.jpeg Any idea? Rob |
| Polarity of white cube power adapter (+ and -) | Relevance | 4 Jahren ago | Robert | Bugs & Issues |
| | Hello, I have an original "white" eblocker cube , but I lost my power adapter. Before plugging in a new one, it might be good to know, where + is, on the inside, or on the outside of the plug... |
| VyprVPN Connection do not work | Relevance | 4 Jahren ago | Liberty-Bit | Bugs & Issues |
| | VPN Connection Test Authentication error Unable to authenticate. This may have different causes, such as your VPN user name or password is incorrect your VPN account is expired or invalid the VPN profile is wrong or corrupted Errors Thu Jun 17 10:58:00 2021 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Thu Jun 17 10:58:00 2021 WARNING: this configuration may cache passwords in memory -- use the auth-nocache option to prevent this Thu Jun 17 10:58:03 2021 AUTH: Received control message: AUT ... |
| Option to Block by Region or Country | Relevance | 4 Jahren ago | dcampbel | Features & Priorities |
| | Maybe I just can't find this in the UI, but it would be great to be able to globally block traffic to certain countries/regions or conversely to allow traffic only to certain countries/regions. I think you can do it device by device via the dashboard, but I don't see a way to do it for the whole network. |
| I would love to see more logging/reporting. | Relevance | 4 Jahren ago | dcampbel | Features & Priorities |
| | Most modern firewalls have great reporting, but the way eBlocker works the firewall sees a lot of the traffic for devices as coming from the eBlocker so the stats and analysis are all off. I would love to either see the eblocker functionality changed so that the firewall knows the actual source device or have some of the reporting capabilities on the eblocker so you can better determine which devices are doing what. For example: - DNS resolution requests by device so you can see which devices are trying to get where.- Connection destinations by device f ... |
| Exception for POSTIDENT app needed | Relevance | 4 Jahren ago | jogi | Bugs & Issues |
| | Hello,can someone tell me what exceptions I need to set so that the POSTIDENT app for Android ( works with eBlocker enabled? Thank you very much |
| "Time/Date auto setting" on Internet Radio dosen‘t work via Tor | Relevance | 4 Jahren ago | Siciliano | Bugs & Issues |
| | Hi folks, this is my first post, I just have bought an used eBlocker Cube. My favorite radio station has activated Geoblocking so that I was forced to hide my IP-address. Usinsg the TOR function therefore works fine. The only issue is the auto setting for time/date which doesn't work, when TOR is activated. Any idea what's the reason for? What do you guess how the radio get it's data, by ICMP or NTP from the router? status log: -A FORWARD -s 192.168.212.167/32 -i eth0 -j REJECT --reject-with icmp-port-unreachable Thank you in advance for your hints! Leo ... |
| RE: No update for white box 2.6 | Relevance | 4 Jahren ago | Steffko_org | Bugs & Issues |
| | Hi folks, since April 1st this year my eBlocker simply refuses to take any updates neither manual, nor automatic. Of course, I already referred to this topic ( unfortuantely none of the suggested proposals to solve the problems led to success. License Type (so far) : eBlocker Family Activation Status (same): activated Activated on: Dec 29th, 2016 Valid till: Lifetime Update license valid until: Lifetime eBlocker Blocker Lists Version: 2021-04-01-06-15-03 Last update: (tried) Apr 27, 2021 2:45 pm Any ... |
| No update for white box 2.6 | Relevance | 4 Jahren ago | grmon | Bugs & Issues |
| | Thanks to @random at the right spot now: When I go to eblocker.box/settings/#!/home/update and click [Check now] und "manual updates" I only get the message "No updates available" Any ideas anyone? Any help is appreciated. |
| No IP after router change | Relevance | 4 Jahren ago | wiegmann | eBlocker Open Source Forum |
| | A new router (Fritzbox 7590) has been installed. On the old router (also 7590) it ran without problems. eblocker is not displayed in the router in the network. All cables are connected. |
| HTTPS using definitions is provided by eBlocker | Relevance | 4 Jahren ago | Anonymous | eBlocker Open Source Forum |
| | The topic ‘HTTPS usage’ made me opening this topic. One of the (predefined) app-definitions of eBlocker is ‘Google (Books, Drive, Mail, Movie, Store, Blog)’. I changed its content to ‘youtubegaming.com’ only, a domain i never use. All other domains in this app-definition i considered ‘suspicious’ and, as i assume that these domains are not only relevant for this particular ‘App’ but are allowed system-wide, they had to leave. Is this line of thinking correct? Rob |
| eBlocker Mobile access to LAN-devices | Relevance | 4 Jahren ago | Anonymous | eBlocker Open Source Forum |
| | Understood that, if ‘eBlocker Mobile’ is installed on an iPad, you can use that VPN-connection to safely access devices in the the home LAN trough that same connection when away from home. If correct, would somebody be kind enough to tell me how? Rob |
| Trusted App/Whitelist setting for iRobot app | Relevance | 4 Jahren ago | jbrunerwa2 | Bugs & Issues |
| | Just purchase an Roomba iRobot 675 and the mobile app won't connect to the cleaner without disabling eblocker. Has anyone by chance already worked out what the exceptions need to be to allow the app to connect without needing to disable eblocker? |
| eBlocker disappeared | Relevance | 4 Jahren ago | Anonymous | Bugs & Issues |
| | Checked White Cube with eOS 2.5.8 for update manually last night around 23:00 h. Since then, my eBlocker disappeared and can’t be found by eBlocker-apps both on my iMac and on my iPad. The app on my iPad shows the address 192.168.1.2, but this can’t be changed manually. On the iMac, the address can be changed to 192.168.178.2, but than the app informs me that no eBlocker can be found on this address. My FRITZ!Box is set to always assign the same IPv4-address 192.168.178.2. IPv6 is disabled in the router. iPadOS 14.4.1; macOS 11.2.3 As i don’t know wha ... |
| F-Droid (free android appstore) and eBlocker (WLAN) | Relevance | 4 Jahren ago | Julius | Bugs & Issues |
| | Hello, is there a known problem of using F-Droid and eBlocker? In my current setting I can't use the F-Droid app store in my WLAN-secured-eBlocker-network. The app-store does not download (preview) images or files. It does work while eBlocker is paused and it does also work on cellular networks I am using a google-free GrapheneOS Pixel 4a The eBlocker-certificate is installed on my smartphone and I can 'surf the net' by using the webbrowser in my WLAN. The eBloker is set to "automatic mode (recommended)" for blocking (as described here) Do I have to add ... |
| Tunnelblick 3.8.4a - eBlocker-ovpn-file | Relevance | 4 Jahren ago | Anonymous | eBlocker Open Source Forum |
| | Created ovpn-file with eBlocker 2.5.8 and used it on my MacBook with OS X 10.11.6 and Tunnelblick 3.8.4a. I get the enclosed message from Tunnelblick, saying that "it can handle the ovpn-file for now but probably not with future versions of Tunnelblick; the eBlocker's ovpn-file should be updated". Attachment : 210308-0001.png |
| Sonos / Spotify-Service Not Accessibility when Eblocker is active | Relevance | 4 Jahren ago | OliverL | Bugs & Issues |
| | Hi, just yesterday I updated my Eblocker (white cube) from 1.7.6 (bought 2017) to the current version without any problems. Everything works fine so far, the only problem I encountered is that on my iPhone and iPad my Sonos S1 app fails to search Spotify or other services. As soon as I disable the Eblocker for the iPhone/iPad I’m able to search Spotify and other services from inside the Sonos app again. Is this a know problem? Are there any hints how to keep Eblocker enabled and still be able to use Sonos/Spotify? P.S. the Spotify app itself works fine even ... |
| Problems with eBlocker & HiDrive Client | Relevance | 4 Jahren ago | Anonymous | eBlocker Open Source Forum |
| | Hello together, I use the HiDrive Client from Strato on the actual macOS System on a MacBook Pro (Mid 2014) and the Client can´t connect to the server. on my iPhone SE (2020) everything is ok, but only on the Mac it makes problems. Are there any ideas what the problem could be? Greetings, Simon |
| Devices to enable | Relevance | 4 Jahren ago | Anonymous | eBlocker Open Source Forum |
| | Which are the criteria to enable, or disable, eBlocker for devices such as a printer, internet radio, smart TV, TV-receiver, NAS, repeater, TomTom etc.? Rob |
| How to get rid of Google | Relevance | 4 Jahren ago | Anonymous | eBlocker Open Source Forum |
| | @randon Changed the Topic Title, but subject remains the same Router: FRITZ!Box 7590 IPv6 Support: disabled in router iMac with macOS Big Sur version 11.2 eBlocker in Original White Cube with eBlockerOS 2.5.8 DNS Firewall: Use eBlocker as DNS server with Default Forwarding BLOKKER: Pattern BLOKKERs as provided by eBlocker; NO other lists added HTTP support (Dashboard): Both HTTP support and Certificate checked Green Status-Test (Dashboard): ALL tests check Green iPad 5e generation with iPadOS 14.4 After we thought to have solved the issue by d ... |
| How to get rid of Google Ads | Relevance | 4 Jahren ago | Anonymous | Bugs & Issues |
| | The behaviour of eBlocker tempts me to return to this forum. My environment: FRITZ!Box 7590IPv6 Support: IPv6 support enabled (Checked)IPv6 Connectivity: Use native IPv6 connection iMac with macOS Big Sur version 11.2iMac settings: DNS-servers: 192.168.178.1 and fd00::2e91:abff:fe46:f1c2Safari version 14.0.3 eBlocker in Original White Cube with eBlockerOS 2.5.8DNS Firewall: Use eBlocker as DNS server with Default ForwardingBLOKKER: Pattern BLOKKERs as provided by eBlocker; NO other lists added HTTP support (Dashboard): Both HTTP support and Certificate ch ... |
| The eBlocker does not work | Relevance | 4 Jahren ago | LeonPP | Bugs & Issues |
| | The icon is not displayed in the browser.In device details it says: eBlocker is activated for this device. Check in "eblocker.org/de/privacy-check/" says location, provider, IP address, etc. are visible. Network mode: Expert (unfortunately I'm not). Noticeable: DHCP service is set to external in the network settings. Underneath with a warning: Configuration for the external DHCP service, the IP address of the eBlocker is displayed. Here I would want to enter the Fritz! Box address that provides this service. But not possible. Unfortunately, I hadn't worked ... |
