| # | Post Title | Result Info | Date | User | Forum |
| Running an Experimental Server on a Virtual Machine within the Network | Relevance | 2 Jahren ago | facebita | Bugs & Issues |
| | I want to configure and run an experimental server on a virtual machine within my local network. The host is my Mac running Virtualbox. The server is a Debian guest on this host. I want to configure the guest following this description: And now I have a question regarding the static IP address of this server. In chapter 6 of the aforementioned description it is recommended to define a static address directly in the settings of this server. Can I follow this instruction, or will it cause troubles with the DHCP server provided by my eBlocker? |
| Telegram app on MacOS don't work with HTTPS enabled | Relevance | 2 Jahren ago | dxisto | eBlocker Open Source Forum |
| | Hello, I'm new to this forum and also to eBlocker. I installed eBlocker in a Raspberry Pi 4 and everything look ok. But when I enabled HTTPS my Telegram APP stuck at CONNECTING... and don't work. I already imported the SSL Certificate using keychain and also checked TELEGRAM at Trusted APPs. Nothing suspicious is showing at COMMUNICATION FAILURES. Can you help me? Thanks in advance. |
| No Internet Connection When HTTPS is Active | Relevance | 2 Jahren ago | facebita | Bugs & Issues |
| | Tonight, unexpectedly my Mac lost its connection to the internet. My Mac has an installed HTTPS certificate from my eBlocker and HTTPS is activated. Obviously there is something happend with the HTTPS configuration in the eBlocker. Because both of my gadgets that are running a HTTPS certificate are unable to connect the internet. But when I on this gadgets discable HTTPS or eBlocker at all, both connect to the internet. The diagnosis tools from my eBlocker doesn’t show any failures. What should I do in order to determine the cause of the malfunction of HTTPS ... |
| Reactivating eBlocker after Shutdown | Relevance | 2 Jahren ago | facebita | Bugs & Issues |
| | I have shut down my eBlocker. Then I have it unplugged from power supply and from the Router Fritzbox 7490. Next I reconnected the LAN cable and the power supply. But now my WLAN were not working. So I activated the DHCP server on the Fritzbox. That brought my WLAN back alive. But my eBlocker remained and remains unreachable in the network on its previous IP address. What can I do in order to reconnect my eBlocker and make it working? |
| Ads still showing even though HTTPS is enabled | Relevance | 2 Jahren ago | jimmysofat6864 | Bugs & Issues |
| | Just like in the main thread regarding YouTube Ads, I am still getting ads for YouTube even though I have eBlocker set as my DNS server and I have all ad blocking lists enabled. And all google services have been disabled in the trusted apps section. And I made sure that my device passes the function tests. Is there something else I am doing wrong here? I have some photos attached. I come from Pi-Hole and AdGuard Home so I am not used to this but I looked at the other threads and did what was recommended there and I still have ads. Any suggestions are appreci ... |
| Do I Know My Hardware? | Relevance | 3 Jahren ago | facebita | Bugs & Issues |
| | Why do I not see on my eBlockers website information about the hardware where my eBlocker is being installed? |
| Snowflake | Relevance | 3 Jahren ago | facebita | Bugs & Issues |
| | Why Snowflake by default isn't a trustworthy service on eBlocker? I've added snowflake.freehaven.net to Mozilla Thunderbird / Firefox. |
| you.com | Relevance | 3 Jahren ago | facebita | Bugs & Issues |
| | Why does eBlocker by default block the new search engine you.com, 172.66.43.199, created by the Dresden originated scientist Richard Socher? |
| Eblocker does not update to 2.10 from 2.9.1 | Relevance | 3 Jahren ago | Evel Knievel | Bugs & Issues |
| | After reading about an update for the original white Cube to 2.10, while runnung 2.9.1, I went on manual update. It finds 73 update files. After hitting the button update, it tells that it needs about 20 min, then the browser switches to preparing update and accessing eblocker, stays on 0 % and tells reboot eblocker and update page. After that you are back on start (Version 2.9.1, press manual update, search,.........) Process takes about 1 min and can be persitant repeated. Internet access is with a Fritzbox 7590 with Firmware 7.50. Never had this with any ... |
| eBlocker mobile and Fritz!box 7490 | Relevance | 3 Jahren ago | facebita | eBlocker Open Source Forum |
| | Obviously something has being changed. I have a Fritz!Box 7490 that has been working seemlessly with an eBlocker running on Raspi3 via eBlocker mobile. Now, I have configured my eBlocker as a brand new one from the scratch. But now, it is to me impossible to configure eBlocker mobile. I use - as before - my dynamic DNS address namesomeoddletters.myfritz.net. UPnP is being activated on Fritz!box. So in next step, I let try eBlocker to self assign the appropriate ports 1194 to 1194. That is calling success. But then, when I push the button "test connection" ... |
| Serious Problems Obviously After Update on 2.10.x | Relevance | 3 Jahren ago | facebita | Bugs & Issues |
| | Since today my eBlocker does not work and, more worsen, obviously did something so that I can not reach the internet even when I unplug the eBlocker from my Fritzbox. I assume, eBlocker performed tonight the update to version 2.10. As well I can not contact my eBlocker via ssh on its IPv4 address in my WLAN: Connection refused at port 22. I am really at the end of my cababilities. I do not really know, where to begin and which steps to go. If I klick on an URI I get the following message in the browser: Error Sorry, an error has occurred. Details: ER ... |
| Webinar at edudip.com | Relevance | 3 Jahren ago | facebita | Bugs & Issues |
| | Does somebody know how to configure eBlocker in order to take part in a webinar broadcasted via edudip.com? I would like to keep all ad blockers and tracking blockers alive while joining the webinar. How would it work? |
| eBlocker function test: Web filtering (HTTPS) failure on iOS eBlockerOS 2.9.1 | Relevance | 3 Jahren ago | ruky | Bugs & Issues |
| | Hello, I have been using eBlocker on iMac, iPad and iPhone for a long time (Rasperry PI) and I use the Safari and the Firefox browser. Unfortunately, I can't get rid of the Web filtering (HTTPS) error in the Dashboard function test. After a new implementation based on the eBlocker Box, a DNS firewall error is now added. Attachment : image.png The error occurs with all devices and with both browsers. As a router I have a Fritz.box 7590 also on current software status like all other devices. I have restarted all devices several times. C ... |
| Manual update "White cube" does not work | Relevance | 4 Jahren ago | steffentaube | Bugs & Issues |
| | As I had to discover, since version 2.8.2 the manual update no longer works. When checking for updates, it tells me that new files are available. If I start the update process, it looks like it is started, but after a very short time it shows that it is finished, but no update was really made. I noticed this when I tried to update to version 2.9. 26 files are displayed for me to update, but nothing changed after the update attempt. I therefore need your help. Attachment : Bildschirmfoto 11.png Vielen Dank. |
| eBlocker not Working on my MacBook Air, Safari 15.1 | Relevance | 4 Jahren ago | Cehpunkt-k7dgt2 | eBlocker Open Source Forum |
| | After a break of using eBlocker i Updated to the latest Version of eBlocker an setup my iPhone and MacBook. Both devices are activated, https is setup and the dashboard and check says that all works correctly. The eBlocker Icon appears too on the sites. On my iPhone, it works as expected, but on my Mac not any banner gets blocked. It is not site specific, that means on all sites I still see banners where I cannot see them on my iPhone. I restarted my Mac, removed the certificate and added it again, disabled the blocker and enabled it again, double checke ... |
| EBlocker IP-Anonymization feature leaks dns | Relevance | 4 Jahren ago | GGGErnest | Bugs & Issues |
| | Hello Eblocker Team, I have configured a vpn using NordVpn provider as you recommended and followed all the steps explained in this guide .After I'm connected to the VPN I ran some tests just to check how well protected I am, and it seems that eblocker has some issue that is leaking DNS which from my understanding should not be the case. Here is how I tested this: 1- I confirmed that NordVpn's server is not leaking DNS' because I connected to the same server using NordVpn's client app and run the same test and it didn't leak any DNS. The test I ran is the ... |
| No port forwarding with FritzBox 6591 FW OS7.29 | Relevance | 4 Jahren ago | frank.b | Bugs & Issues |
| | Hi eBlocker Team I make my first setup with the RP4 2GB and eBlocker FW2.8. Most everything works great and the menus usability is perfect!! Right now only one issue:My eBlocker couldn't set via UPnP the port forwarding for remote/mobile access. I tried to set it manuell, but FritzBox shows eBlocker with the same IP of it self (both 192.168.178.1 ?!) The eBlocker app shows 192.168.178.75 for the eBlocker, what makes sense. If I select the eBlocker in the setup, the wrong IP is used in FritzBox port forwarding (picture) Attachment : IMG_2728.jpeg ... |
| Use of eBlocker Mobile & power consumption | Relevance | 4 Jahren ago | jogi | eBlocker Open Source Forum |
| | Hello all, I use eBlocker Mobile daily via OpenVPN at Android. What options do I have to save battery? The app has a very high battery consumption. Thank you |
| eBlocker Automatic daily updates does not function | Relevance | 4 Jahren ago | Seppo.Isorinne | Bugs & Issues |
| | Observing the eBlocker console, it looks like eBlocker is working because lines run temporarily on the console. There is no log file to tell in advance whether one or the other update has ever run. Manual Updates shows that 87 updates will be available. And that is shown again and again at short intervals. Pushing to update tells the app that it is being updated, but nothing happens at all on the eBlocker console. The app then reports that eBlocker will be restarted, but nothing happens at all on the console. eBlocker is not restarted. System eve ... |
| eBlocker Mobile issues | Relevance | 4 Jahren ago | BonyCB | Bugs & Issues |
| | Dear community, since a couple of days, eBlocker Mobile stopped working. Only eBlocker reboot is fixing the issue, however I need to restart every day the eBlocker in the morning to get the eBlocker Mobile function working. I did not changed anything on my network or on my eBlocker Mobile settings prior getting that issue. Does anybody experience the same behavior? THX BonyCB |
| Quick access to Dashboard on Mac | Relevance | 4 Jahren ago | Anonymous | eBlocker Open Source Forum |
| | Whenever i start Safari, especially after a reboot, it takes more time than i'm willing to wait before the eBlocker GUI is shown. To circumvent this issue, i use a Menu Bar Browser shown below. The moment i click on the eBlocker logo in the Menu Bar, the GUI is available. For this i use the app MenuBarX ( available in Apple's App Store. Rob Attachment : shot.png |
| Problems with the download speed in the network | Relevance | 4 Jahren ago | Zwergkralle | eBlocker Open Source Forum |
| | Hello, I often have the following problem:My broadband measurement results in download speeds in the home network that are far too low. (Only 3% to 5% of the booked tarif reaches me: 1000Mbit/s booked, broadband measurement on PC or apple TV results in 30 MBit/s). All this time I have been looking for a fault in my home network (router, switch, patch field etc....). By chance I just saw that the public DNS server 9.9.9.9 which was recommended by eblocker.org was rated as unreliable. After deleting the unreliable DNS server, I am currently measuring appro ... |
| eBlocker does only block trackers & Co. on the top level domain | Relevance | 4 Jahren ago | kanaloa | Bugs & Issues |
| | Hello, eBlocker does only block trackers & co. on the top level domain. For example, if I navigate to www.macrumors.com eBlocker shows 4 blocked trackers. If I click on another link (here macOS Monterey) eBlocker does not show any blocked trackers. The same happen to www.spiegel.de. Attachment : Bildschirmfoto 2022-01-10 um 12.09.28.png Attachment : Bildschirmfoto 2022-01-10 um 12.09.44.png |
| Bromite, Android, eBlocker Certificate | Relevance | 4 Jahren ago | taipan | eBlocker Open Source Forum |
| | Dear all, I use Android (grapheneos), eBlocker 2.8.2 and usually fennec as my browser. The certificate to use https is installed in Android. This all works well. Now I read that fennec is crap and bromite browser is the better option. So I thought I give it a try. It seems to me that Bromite does not recognise the certificate and I could not find a setting in bromite to add one. I am sure this can be done. What did I overlook? Thanks in advance. |
| Problems after Plugin Installation (Foscam) | Relevance | 4 Jahren ago | Zwergkralle | Bugs & Issues |
| | Hello, I have the following problem and I can not classify who to contact with it: My eblocker is running fine so far. An eblocker certificate for https pages is installed.I can access all the websites I want to visit without any problems. I use a new Foscam camera and would like to access the cloud of Foscam. When I go to the site and log in, I get a message that to use the service a plugin must be installed (fscloud.pkg). But as soon as I install this plugin suddenly I am not able to visit any websites anymore, because I get a message that almost all ... |
| setup VPN with Ivacy | Relevance | 4 Jahren ago | Zwergkralle | eBlocker Open Source Forum |
| | Hello, Which configuration file do I need to download from my provider (Ivacy)? - Configuration files for router- VPN for Linux- ??? What specifically do I need to ask my VPN provider to get the correct configuration files? Thanks Attachment : Bildschirmfoto 2021-11-13 um 20.43.20.pdf Attachment : Bildschirmfoto 2021-11-13 um 20.43.29.pdf |
| eBlocker functionality | Relevance | 4 Jahren ago | BonyCB | eBlocker Open Source Forum |
| | Dear community, I've observed that the e-Blocker shows not at least the same tracker/add blocking behavior as in Safari 15.1 with disabled tracking option. Following screenshot as an example of the observed situation: 1. Safari information on website tracking indicated by Safari 15.1 and OSX Monterey 12.0.1: Attachment : Bildschirmfoto 2021-11-04 um 08.10.38.png You can see in the left upper corner, that the e-blocker is active, however no information of blocked trackers as mentioned by Safari. 2. Safari settings for data security: Attachm ... |
