# | Post Title | Result Info | Date | User | Forum |
| can not update to 2.5 with white cube | Relevance | 1 Monat ago | enemymine | Bugs & Issues |
| I Just reactivated my old white cube and I'm using eBlockerOS 2.4 behind a fritzbox 7590. I reset it to factory setting and was able to got through the initial setup process. No I'm stuck with the Update. When trying to update to 2.5 the Lightbox popup seems to fail when loading the term of service and therefore I can not initiate the process. See att. screenshot Attachment : image.png |
| eBlocker does not (properly) update & License activation does not work anymore | Relevance | 2 Monaten ago | mr.bien | Bugs & Issues |
| Hi, after having some serious issue with my network stability I recognized that my eBlocker did not work properly anymore. Updates weren't done, and I observed then that it contained the very old "Family License" and did not apply my current DONOR-license. Trying to activate the DONOR-license again did not solve the issue. Still says "Family License", activated November 2021. Obviously, things like automatic list update also are not working anymore. Rebooting did also not change anything (anyway, I did not unplug the power supply yet). I do not know what c ... |
| Rasberry network connection not available | Relevance | 2 Monaten ago | CKBuch | Bugs & Issues |
| Hello, I can no longer find the Rasberry in the network via the router. I have installed the software on the SD card again, but without success. How can I find out whether the Rasberry - Model 4 - B - is defective? Thank you and best regards |
| ChatGPT | Relevance | 2 Monaten ago | RobF | Bugs & Issues |
| I thought eBlocker was running smooth and easy, until Attachment : IMG_0083.png Looks OK; the next screens equally OK Attachment : IMG_0084.png but then ... Attachment : IMG_0085.png opening the ChatGPT-app resulted in above message (no need the translate the Dutch wording i guess 😏 What happened here? Regards, Rob |
| Reuters | Relevance | 3 Monaten ago | RobF | Bugs & Issues |
| When i try to read the Reuters-app on my iPad, i get the following screen Attachment : IMG_0067.png Without eBlocker or when eBlocker is paused, the app works OK After allowing all blocked addresses in the Personal Firewall (Dashboard), i still get the message shown. When Recording Manually (Settings/HTTPS) and after i got that same message and stopped the recording, there is no result at all. Every possible checkmark that can be green IS green. Anybody some good ideas? |
| Bitdefender - issues with update | Relevance | 3 Monaten ago | BonyCB | Bugs & Issues |
| Since a while, Bitdefender is only updating, If I disable the e-Blocker. Bitdefender is activated as trusted app and trusted websites. Attachment : Bildschirmfoto 2024-11-03 um 16.54.48.jpg Attachment : Bildschirmfoto 2024-11-03 um 16.55.37.jpg Attachment : Bildschirmfoto 2024-11-03 um 16.56.07.jpg third picture shows proper function of Bitdefender update after pause of the e-blocker. Any idea what to do? BR BonyCB |
| RCS being blocked | Relevance | 4 Monaten ago | jbrunerwa2 | eBlocker Open Source Forum |
| I'll add all the diagnostic / configuration information if needed. First, I'd like to see if others are seeing problems sending RCS messages? I'm able to send if I pause but not with the blocker fully enabled. Anyone else? |
| facebook | Relevance | 4 Monaten ago | RobF | eBlocker Open Source Forum |
| Hi everybody, When i include the adres 'star.c10r.facebook.com' (and its siblings 'star-mini.c10r.facebook.com' and 'star.fallback.c10r.facebook.com') in 'Dashboard/Block Domains', these addresses are blocked as intended on the device concerned. I tried several methods (URL List / easylist), (Maintain own list / Provide download URL) to include these addresses in 'Settings/Blocker/Pattern Tracker Blocker', but i didn't manage to get eBlocker to block these addresses in this way. I'm not sure i used the correct (easylist-) format or made other mistakes. Co ... |
| Frameo picture frame trusted app config | Relevance | 5 Monaten ago | Andreas Viering | Bugs & Issues |
| Hi, does anybody have a working trusted app definition for the frameo app? I tried manual recording and created a new trusted app config. It does not work. Disabling eBlocker solves the connection problem |
| Some feature request | Relevance | 10 Monaten ago | DeepUnder | eBlocker Open Source Forum |
| Hi, Ive been using Eblocker for a few weeks now and it’s been a great project, well done team. Could I request some additions, - disable the Eblocker has detected a tracking site. The reason for this is that some IOS games load a tracking URL and the game quits and loads up safari with the notification. Presently the only way to avoid this is to allow the tracking site. - add the ability to enable / disable the controller bar for multiple clients. - Apple TV support i have found the ability to install the HTTPS root certificate on the Apple tv ... |
| Dashboard is suddenly without information | Relevance | 10 Monaten ago | wex | Bugs & Issues |
| I don't know how it happened, but for a while I could see some information for my devices in the dashboard. Some boxes were visible. Now for two weeks I see nothing. Can someone give me a tip on what to do about this ? |
| Mobile Ads | Relevance | 10 Monaten ago | DeepUnder | Bugs & Issues |
| Hi, i've just started using eBlocker and have enabled HTTPS blocking and uBlock under pattern blocking. All is going well, however mobile ads are still shown. I have confirmed the certiifcate is installed. also, when i use the following website to test ad blocking, it comes up as only 10% being blocked. Not sure if this is correct. <a href=" removed link ">Test Ad Block - Toolz (d3ward.github.io) are there any further settings to look into to disable mobile ads and increase the percentage in blocking ads above. thanks |
| evcc Service on eBlocker-Raspberry Pi - any issues? | Relevance | 11 Monaten ago | mr.bien | eBlocker Open Source Forum |
| Hello everyone, may be a stupid question - but I am not that experienced with Raspberry-Pi and its capabilities. I have eBlocker running on Raspberry-Pi. Runs perfectly. For my home, we are about installing photovoltaics and want to take advantage of surplus loading together with an electric vehicle. For that purpose, another Raspberry-Pi application "evcc" is recommended in order to control the power flow of the photovoltaics system. I wonder if I should or could reuse the existing Raspberry-Pi hardware serving eBlocker today also for that addtional ev ... |
| reCAPTCHA | Google for Developers | Relevance | 1 Jahr ago | RobF | Bugs & Issues |
| As some of you may recall, I detest Google and the question I have only has to do with eBlocker on the sideline. Apart from this issue, my white cube with eOS 3.0.3 works flawless. When trying to login with my hosting provider Cloud86 ,I can't get in as long as eBlocker is switched ON. Reason: they use reCAPTCHA to provide a ' Save login'. IMHO this is "go to the confession with the Devil". Of course I could Pause eBlocker during login. Hm... Or include the relevant connections in a 'safe' app. Hm... |
| Backup broken under 3.0.1 | Relevance | 1 Jahr ago | RobF | Bugs & Issues |
| Since the update to eBlockerOS 3.0.1, I can't find the backup file made by Settings/System/Backup in the download folder. This is true for my iPad and my iMac. Last time I made a backup was November 12th and had no problem then. Tried it several times and downloaded files from various internet sites, just to make sure that the download-location was unchanged. As always, I can't exclude my own errors 😉 Rob |
| DNS curiosity | Relevance | 1 Jahr ago | RobF | eBlocker Open Source Forum |
| Dear gentlemen, Would anyone care to explain the following. The eBlocker and internet access work as they are supposed to do and eBlocker is set as DNS server with a custom list of external servers as shown below Attachment : IMG_2377.png The Cloudflare server 1.1.1.1 normally shows a green checkbox mark, but for some reason (?) it doesn't do so now. The Quad9 server 9.9.9.9 didn't show a green checkbox mark since a long time (weeks/months!). Now, i just wander how the eBlocker is choosing between these 2 servers or any other additional server ( ... |
| Google ads are back again | Relevance | 1 Jahr ago | RobF | Bugs & Issues |
| Hi everybody, Would appreciate a hint to solve above problem which came back for an unknown reason. As an example i enclose 2 screenshots of 'watismijnipadres.nl'. Attachment : IMG_2361.png Attachment : IMG_2367.png To start with, everything which can be green in eBlocker's dashboard is green. Attachment : IMG_2362.png Attachment : IMG_2363.png eBlocker acts as DNS Attachment : IMG_2364.png Attachment : IMG_2365.png and is in Automatic mode Attachment : IMG_2368.png All Pattern Blockers p ... |
| Certificate renewal on iPad failed | Relevance | 1 Jahr ago | taipan | Bugs & Issues |
| Dear all, after three years of happily using eBlocker I had to renew my https certificate. Easy peasy to do in eBlocker. Renewed it, downloaded it to my iPad, went through the installation process. Going into the dashboard I get an error message with the red !, that there is no certificate. In my settings I see the new Attachment : IMG_1875.jpeg Attachment : IMG_1877.jpeg Attachment : IMG_1876.png eBlocker certificate added. I have redone the process, but must have made a mistake somewhere. Maybe it helps to know that the ... |
| Telegram app on MacOS don't work with HTTPS enabled | Relevance | 1 Jahr ago | dxisto | eBlocker Open Source Forum |
| Hello, I'm new to this forum and also to eBlocker. I installed eBlocker in a Raspberry Pi 4 and everything look ok. But when I enabled HTTPS my Telegram APP stuck at CONNECTING... and don't work. I already imported the SSL Certificate using keychain and also checked TELEGRAM at Trusted APPs. Nothing suspicious is showing at COMMUNICATION FAILURES. Can you help me? Thanks in advance. |
| YouTube Ads get blocked with eBlocker | Relevance | 1 Jahr ago | none | eBlocker Open Source Forum |
| I just wanted to give a big Thank You 👏 to the eBlocker team. YouTube remains ad-free on my iOS Safari and Windows Firefox. 😁 All other ad-blockers I've tried failed recently 👎 Probably because Google is cracking down on ad-blockers. Good job, eBlocker👍👍 |
| VPN connection breaks repeatedly | Relevance | 1 Jahr ago | mr.bien | Bugs & Issues |
| I have an issue with repeatedly breaking VPN connections. Only rebooting eBlocker solves the issue temporarily. I am using NordVPN and activate it per device. This works until a certain point in time. Then, the internet connection drops until I disable VPN for the device. Trying to enable it again throws an error as shown in the attached screenshot. Attachment : IMG_0654.jpeg Rebooting eBlocker solves the issue temporarily, meaning that everything works smoothly again also with VPN enabled. No idea which event breaks the connection. It is just ... |
| Trouble Setting up NORD VPN | Relevance | 1 Jahr ago | mr.bien | Bugs & Issues |
| Hi, I just purchased NordVPN. It also works with the provided NordVPN app, but I am failing to set it up using eBlocker. There seems to be authentication failures, which I cannot explain. As recommended on your website, I was choosing one of those UDP-Files as part of the zip-file of our web-site. I added my credentials to the wizard and everything seems to be set up properly. "Test Connection" says Unable to authenticate. This may have different causes, such as your VPN user name or password is incorrect your VPN account is expired or invalid the ... |
| Lacking some green checkmarks after initial setup | Relevance | 1 Jahr ago | FF44 | eBlocker Open Source Forum |
| Attachment : IMG_5069.jpeg Attachment : IMG_5074.jpeg Attachment : IMG_5068.jpeg Attachment : IMG_5067.jpeg Attachment : IMG_5071.jpeg Attachment : IMG_5076.jpeg Attachment : IMG_5075.jpeg Hey, After a little break I am back as a donator. As my „weißer Würfel“ refused to boot I followed your guide and flashed an external SD to get it going again. Booted and followed the initial setup steps until where it says „make sure all checkmarks show green before you continue“. I keep lacking three green che ... |
| eBlocker HTTPS filtering inconsistent, not running on all websites | Relevance | 1 Jahr ago | jimmysofat6864 | Bugs & Issues |
| I don't know if I am the only person with this issue but I am having issues with eBlocker activating with every website. For example, if I visit theverge.com on my MacBook or my iPhone, I get the icon indicating that eBlocker is working. But if I visit weather.com on my MacBook, it doesn't show the eBlocker icon but sometimes works and shows the icon. But when visiting it on my iPhone, I get the icon and ads are blocked. And there are other websites as well with this issue. If I visit gogoanimehd.to on my MacBook, I get the eBlocker icon. But if I visit it o ... |
| HTTPS filtering not working | Relevance | 2 Jahren ago | LieberGott | Bugs & Issues |
| Hi all, need your support. Topic is possible to find but solutions not helpful in my case. Since yesterday (?) seems https filtering is not working anymore, when I am running the function test I got a warning message for "Web filtering (HTTPS)", independently if I run it with the eBlocker app or in a browser window. Also the cookie banners are back unfortunately :/ Today on my Mac eBlocker asked for a certificate, also the current one was valid until next year (seems deactivate it?). I downloaded a new certificate, and installed and activated it. eBlock ... |
| Eblocker does not update to 2.10 from 2.9.1 | Relevance | 2 Jahren ago | Evel Knievel | Bugs & Issues |
| After reading about an update for the original white Cube to 2.10, while runnung 2.9.1, I went on manual update. It finds 73 update files. After hitting the button update, it tells that it needs about 20 min, then the browser switches to preparing update and accessing eblocker, stays on 0 % and tells reboot eblocker and update page. After that you are back on start (Version 2.9.1, press manual update, search,.........) Process takes about 1 min and can be persitant repeated. Internet access is with a Fritzbox 7590 with Firmware 7.50. Never had this with any ... |
| howto place script for cronjobs // howto add a simple cronjob? | Relevance | 2 Jahren ago | Linux_User | eBlocker Open Source Forum |
| Dear support. Plan is simple. And here it is: sudo nano removed link #!/bin/bash sudo shutdown -h now sudo chmod +x removed link sudo crontab -e 7 06 * * 1-5 removed link 7 22 * * 1-5 removed link 7 23 * * 6-7 removed link And here comes why, i want to save money about energy comsumtion. the most of the Day im not at home. power on is realized by a time energy clock. i didnt know the english word. timerclock for power. it turns the router and eBlocker on and off. but ones the pi (my hardware for eBlocker) is started i must shutd ... |
| Ads are gone everywhere. YouTube ad free. Awesome! | Relevance | 2 Jahren ago | none | eBlocker Open Source Forum |
| I‘m new to eBlocker and just wanted to share my happiness. 🥳 I don‘t care much about the privacy thing. 😐 But the ad blocking feature is simply awesome and best if‘ve seen.🛑😁 Ads are even gone in my iPad apps. Magic, how this works without extra software. 😁😁😁 Streaming videos from YouTube completely ad free to the smart TV rocks 😎 FCK annoying commercials. 🤮 Honestly, this is the best tech ever👍🙏 Thanks so much! Keep up the good work 🚀 |
| YouTube ad-blocker works for netzkino too | Relevance | 2 Jahren ago | subscriber | eBlocker Open Source Forum |
| I‘m a big fan of the YouTube ad-blocker for my iPad. Well done 👍 Today I found out it also works great with netzkino.de. The only trick is to pause eBlocker initially and deny the cookie banner once. Then unpause - and welcome to ad free videos. Thank you for this awesome technology! 😎 |
| Individual Network Settings | Relevance | 2 Jahren ago | RobF | eBlocker Open Source Forum |
| My eBlocker works just fine in Automatic Mode and that's the only remark for 'experts' that is made by the Doctor. So, my family is fully protected as intended. Now, lets use the Individual Setting and assume i'm on a business trip, divorced or even deceased and there is a problem with the network inside or outside of the home network. Unplugging and reconnecting the router (standard solution) could work if the problem is within my own network, removing the eBlocker doesn't help either (members of my family or a service technician from the ISP don't know wh ... |
| eBlocker mobile questions | Relevance | 2 Jahren ago | RobF | eBlocker Open Source Forum |
| Hi, Haven't been around on this forum for quite some time, but would appreciate if somebody could and would give a hint. Got a fixed IP-address from my ISP, disabled IPv6 in my FRITZ!Box 7590 and set up portsharing according to 'The eBlocker Mobile Function' instructions in the online eBlocker user manual. However, neither the test in eBlockers settings (see screenshot) nor a site like 'Open Port Check Tool' (canyouseeme.org) can detect an open port. Have been using eBlocker Mobile in the fast, but since it was no longer possible to use it i stopped usin ... |
| eBlocker function test: Web filtering (HTTPS) failure on iOS eBlockerOS 2.9.1 | Relevance | 2 Jahren ago | ruky | Bugs & Issues |
| Hello, I have been using eBlocker on iMac, iPad and iPhone for a long time (Rasperry PI) and I use the Safari and the Firefox browser. Unfortunately, I can't get rid of the Web filtering (HTTPS) error in the Dashboard function test. After a new implementation based on the eBlocker Box, a DNS firewall error is now added. Attachment : image.png The error occurs with all devices and with both browsers. As a router I have a Fritz.box 7590 also on current software status like all other devices. I have restarted all devices several times. C ... |
| Banana pi issues - no internet connection | Relevance | 2 Jahren ago | RDD179 | Bugs & Issues |
| Hello, I tried today to reactivate my eBlocker on my banana pi m2+ (no withe cube, selfbuild). I flashed the SD card with the image from eblocker.org 2.6.2 and connected the eblocker to the router. During the configuration I have to agree to the license agreement. The problem is that with the eblocker connected I have no internet connection, even the fritzbox is not available. If I disconnect the eblocker everything works find. But I cannot check the agree button because of the issue: " Unable to load the license agreement. An Internet connection is requir ... |
| Manual update "White cube" does not work | Relevance | 3 Jahren ago | steffentaube | Bugs & Issues |
| As I had to discover, since version 2.8.2 the manual update no longer works. When checking for updates, it tells me that new files are available. If I start the update process, it looks like it is started, but after a very short time it shows that it is finished, but no update was really made. I noticed this when I tried to update to version 2.9. 26 files are displayed for me to update, but nothing changed after the update attempt. I therefore need your help. Attachment : Bildschirmfoto 11.png Vielen Dank. |
| eBlocker not Working on my MacBook Air, Safari 15.1 | Relevance | 3 Jahren ago | Cehpunkt-k7dgt2 | eBlocker Open Source Forum |
| After a break of using eBlocker i Updated to the latest Version of eBlocker an setup my iPhone and MacBook. Both devices are activated, https is setup and the dashboard and check says that all works correctly. The eBlocker Icon appears too on the sites. On my iPhone, it works as expected, but on my Mac not any banner gets blocked. It is not site specific, that means on all sites I still see banners where I cannot see them on my iPhone. I restarted my Mac, removed the certificate and added it again, disabled the blocker and enabled it again, double checke ... |
| No port forwarding with FritzBox 6591 FW OS7.29 | Relevance | 3 Jahren ago | frank.b | Bugs & Issues |
| Hi eBlocker Team I make my first setup with the RP4 2GB and eBlocker FW2.8. Most everything works great and the menus usability is perfect!! Right now only one issue:My eBlocker couldn't set via UPnP the port forwarding for remote/mobile access. I tried to set it manuell, but FritzBox shows eBlocker with the same IP of it self (both 192.168.178.1 ?!) The eBlocker app shows 192.168.178.75 for the eBlocker, what makes sense. If I select the eBlocker in the setup, the wrong IP is used in FritzBox port forwarding (picture) Attachment : IMG_2728.jpeg ... |
| eBlocker Mobile issues | Relevance | 3 Jahren ago | BonyCB | Bugs & Issues |
| Dear community, since a couple of days, eBlocker Mobile stopped working. Only eBlocker reboot is fixing the issue, however I need to restart every day the eBlocker in the morning to get the eBlocker Mobile function working. I did not changed anything on my network or on my eBlocker Mobile settings prior getting that issue. Does anybody experience the same behavior? THX BonyCB |
| Problem with Fritz!Box 7530ax | Relevance | 3 Jahren ago | zieht_hurras | Bugs & Issues |
| Hi together, a run first a 7850, everything was perfect. Now I own a neu router 7530ax with a lan-bridge e3000. I run a fresh install of eblocker an my raspy. Now the problem is, that the ip of the eblocker is changing from x.x.x.38 sometimes to x.x.x.1 and back. I tried to setup the connection as expert. Blocker to x.x.x.38 and DHCP extern. Portforwarding does not work out of the box but wenn I do it then manually. But the the https doesn't work correct, Dashboard, VPN, etc. Is there a way to get eblocker running? Now when I run a clean new install the ... |
| Selective add to the blocker list in PDFW | Relevance | 3 Jahren ago | taipan | Features & Priorities |
| Hi all, sometimes I see an entry in my PDFW I would like to block: e.g. a.b.c.d. In eBlocker I can only choose this and block. But what if I want to block b.c.d or c.d or d. Then I have to edit it later on again in the block list. It would be awesome to be able to block e.g. c.d. Without later editing of the block list. Honestly, to me, this is a prio 4 issue and without evidence or experience it appears to me this is not easy to implement in the current GUI. But I thought I still mention it. Maybe I am wrong. Regards and thanks for keeping eBlocker sti ... |
| Add export/import to PDFW | Relevance | 3 Jahren ago | taipan | Features & Priorities |
| Hi all, I use the PDFW extensively and with great pleasure. I would love to be able to export the list, in case something happens, and import it again. Thanks. |
| Quick access to Dashboard on Mac | Relevance | 3 Jahren ago | Anonymous | eBlocker Open Source Forum |
| Whenever i start Safari, especially after a reboot, it takes more time than i'm willing to wait before the eBlocker GUI is shown. To circumvent this issue, i use a Menu Bar Browser shown below. The moment i click on the eBlocker logo in the Menu Bar, the GUI is available. For this i use the app MenuBarX ( available in Apple's App Store. Rob Attachment : shot.png |
| No access to home devices via VPN | Relevance | 3 Jahren ago | Corner | eBlocker Open Source Forum |
| Hello, I have successfully installed eblocker with a Raps 4 and everything is running great.I have a FritzBox 7590, the DHCP server is disabled and this is done by the eBlocker.IPv6 is disabled in the FritzBox because the eBlocker does not support this yet. Now my question:I have installed VPN via the eBlocker and installed OpenVPN on the iPhone.This works so far.If I am connected via VPN to my home network, I should have access to my home device as if I am in the W-Lan network.Unfortunately all apps on the Iphone do not find my home devices. I have no acc ... |
| Eblocker between two routers | Relevance | 3 Jahren ago | taipan | Bugs & Issues |
| If you believe this is wrongly placed here, please let me know if there are other forums or links with info. Issue: eBlocker does not recognise traffic from second FritzBox. Question: How do I configure the Fritz4060 so the traffic is sent through eBlocker, as with the TPLink. Current setup which works:Internet-FritzBoxISP-eblocker -Tplink WLAN Router TPLink Router and eblocker are both connected via LAN to the FritzBox. TP Link is not in a mesh or so setup. It uses a different subnet. EBlocker recognises it. I can configure eblo ... |
| Problems with the download speed in the network | Relevance | 3 Jahren ago | Zwergkralle | eBlocker Open Source Forum |
| Hello, I often have the following problem:My broadband measurement results in download speeds in the home network that are far too low. (Only 3% to 5% of the booked tarif reaches me: 1000Mbit/s booked, broadband measurement on PC or apple TV results in 30 MBit/s). All this time I have been looking for a fault in my home network (router, switch, patch field etc....). By chance I just saw that the public DNS server 9.9.9.9 which was recommended by eblocker.org was rated as unreliable. After deleting the unreliable DNS server, I am currently measuring appro ... |
| eBlocker Mobile not working | Relevance | 3 Jahren ago | Anonymous | eBlocker Open Source Forum |
| @random Before dealing with the topic, i want you to know that i regret the friction we had during our last encounter. On this forum you are - as far as i'm concerned - the boss and i therefore seriously intend to stick to the 2 rules shown below. Attachment : AAFB6C7B-2C2A-4120-A85C-72012514BE4E.jpeg Both on my iPhone and my iPad i tried to use Mobile in conjunction with my FRITZ!Box 7590 and the app OpenVPN, version 3.2.3. Tests stipulated an OK Attachment : 13C68F87-FCDD-400A-876E-0EB17E72FB41.png Attachment : 3DCDF57C-6FD1-4C03- ... |
| eBlocker does only block trackers & Co. on the top level domain | Relevance | 3 Jahren ago | kanaloa | Bugs & Issues |
| Hello, eBlocker does only block trackers & co. on the top level domain. For example, if I navigate to www.macrumors.com eBlocker shows 4 blocked trackers. If I click on another link (here macOS Monterey) eBlocker does not show any blocked trackers. The same happen to www.spiegel.de. Attachment : Bildschirmfoto 2022-01-10 um 12.09.28.png Attachment : Bildschirmfoto 2022-01-10 um 12.09.44.png |
| eBlocker assigns many ip address for one device | Relevance | 3 Jahren ago | Chinmayo | Bugs & Issues |
| see screenshot. Reinstalled Raspery eblocker os, DNS Server is Fritz!Box Router, eBlocker runs in Automatic Network Mode. Issue appears not with some MacBook in my office. Some Router. Any Ideas? Attachment : Bildschirmfoto 2022-01-09 um 22.19.37.png |
| Connection drops every 2-5 minutes | Relevance | 3 Jahren ago | OnSerious | eBlocker Open Source Forum |
| Hi, i gave eBlocker a try and love it. But i have a very strange behavior on my home network and don’t know how to sort it out. Quick Facts: - FritzBox 7590 (Mainbox) on 1&1 Versatel Line - FritzBox 7490 (used as Wifi Repeater connected over LAN) - FritzRepeater 1200 - OpenWRT Device (used as Wi-Fi Repeater connected over LAN) Hardware: Raspberry PI3 B connected over LAN directly to FritzBox 7590 running eBlocker 2.8.2 Problem: I am running eBlocker in expert mode with external DHCP (7590). FritzBox IPv6 disabled, and DHCP DNS Setting on 7590 s ... |
| How can I allow VGWort tracker? | Relevance | 3 Jahren ago | hellb | Bugs & Issues |
| I would like to allow the tracker met.vgwort.de as this is how authors in Germany earn money every time an article is read. Any way to do this? It would be great if eBlocker would block VGWort only on request as this is really one of the rare "good" trackers. |
| Blick.ch APP iOS not Work | Relevance | 3 Jahren ago | CHRvE | Bugs & Issues |
| Hello, i can't open the BLICK.CH APP in iPhone 12Pro (All iOS Versions) When i start the app, pop's on and closed afther 1-2 sec. Only whan i disable WERBE Blocker runs fine. With Https Verbindungfehler i not see any links/port i must manually open. Thanks |
| Log4j Library used by eblocker. | Relevance | 3 Jahren ago | kanaloa | Bugs & Issues |
| Does eblocker uses the Log4j library? And if yes, when do you plan to fix that issue? |
| Problems after Plugin Installation (Foscam) | Relevance | 3 Jahren ago | Zwergkralle | Bugs & Issues |
| Hello, I have the following problem and I can not classify who to contact with it: My eblocker is running fine so far. An eblocker certificate for https pages is installed.I can access all the websites I want to visit without any problems. I use a new Foscam camera and would like to access the cloud of Foscam. When I go to the site and log in, I get a message that to use the service a plugin must be installed (fscloud.pkg). But as soon as I install this plugin suddenly I am not able to visit any websites anymore, because I get a message that almost all ... |
| eBlocker (Cube) doesn't show any reaction | Relevance | 3 Jahren ago | sasant | Bugs & Issues |
| Hi there, after a while I've tried to reactivate my former licensed eBlocker but it isn't showing up in my network.So the network-activity LED are showing orange: flashing with approx 2second pause, green: various activity. In Fritz 7590 network overview the eBlocker doesn't show up also. I've tried with several computers (Mac 10.14 and 10.15 and Win10) and browsers (Safari, Firefox, Opera). Cache has also been deleted. So are there any other ideas? Is there an opportunity to reinstall any other (newer) eBlocker OS to the cube? I'm going to have a yearly s ... |
| eBlocker Mobile stopped working | Relevance | 3 Jahren ago | BonyCB | eBlocker Open Source Forum |
| Dear community, Today I experienced that the eBlocker Mobile function is not working anymore, which did on last Saturday, 27th of November 2021. I did not changed anything on the e-Blocker settings, neither on the Fritzbox 7590. VPN settings is via e-Blocker server. No external VPN setup installed. Did anybody else experienced similar behavior? THX BonyCB |
| setup VPN with Ivacy | Relevance | 3 Jahren ago | Zwergkralle | eBlocker Open Source Forum |
| Hello, Which configuration file do I need to download from my provider (Ivacy)? - Configuration files for router- VPN for Linux- ??? What specifically do I need to ask my VPN provider to get the correct configuration files? Thanks Attachment : Bildschirmfoto 2021-11-13 um 20.43.20.pdf Attachment : Bildschirmfoto 2021-11-13 um 20.43.29.pdf |
| eBlocker functionality | Relevance | 3 Jahren ago | BonyCB | eBlocker Open Source Forum |
| Dear community, I've observed that the e-Blocker shows not at least the same tracker/add blocking behavior as in Safari 15.1 with disabled tracking option. Following screenshot as an example of the observed situation: 1. Safari information on website tracking indicated by Safari 15.1 and OSX Monterey 12.0.1: Attachment : Bildschirmfoto 2021-11-04 um 08.10.38.png You can see in the left upper corner, that the e-blocker is active, however no information of blocked trackers as mentioned by Safari. 2. Safari settings for data security: Attachm ... |
| Ads in relation to VPN | Relevance | 3 Jahren ago | Anonymous | Bugs & Issues |
| Not sure whether this is a new issue or not. To start with, i made sure that IPv6 is disabled in my FRITZ!Box. When anonymized trough the eBlocker, using a PIA-ovpn.file, i see Google-ads as shown below Attachment : 6F165DA7-DD15-42A1-9CE7-DFDC3C44F7B9.png Attachment : F8EC0C59-AA94-4248-B9EC-06AB0B3002D4.png When not using eBlockers anonymization, the ad disappears, equally as shown below Attachment : 7B6D2C3A-6592-4107-966F-9CAA20291969.png Attachment : 6B67ABC9-8567-42AF-86BB-3254502F56BF.png Is there a way to alway ... |
| Pause eBlocker doesn't work | Relevance | 3 Jahren ago | BonyCB | Bugs & Issues |
| Dear community, not sure if somebody of you experienced the same behavior of the e-Blocker, since I didn't found any post on that subject so far in the forum. Since a couple of weeks I experience that I can't pause the e-blocker on my devices using the eBlocker Dashboard or via the eBlocker bar. And this on all of my devices (iPhone, iPad, MacBook Pro, Win devices). All devices are running the latest OS versions and default internet explorers in their latest version. The only way how to pause the e-Blocker is to go into the eBlocker settings and disable t ... |
| eBlocker works, but Settings page is blank after update to latest version (2.7.7 I guess) | Relevance | 3 Jahren ago | mr.bien | Bugs & Issues |
| Hi, I just manually updated to the latest version of eBlockerOS. I guess it was 2.7.7 (where can I trace this if the settings-page is not available?). eBlocker works, the dashboards work, but accessing settings just shows a blank page. Also things like the https-Wizard cannot be accessed. So I guess everything what is accessed over settings cannot be opened. When I installed the update I was not able to access eblocker for around 90mins until I unplugged it from power. After reboot, eBlocker works in general, but settings page is gone. Everything else seem ... |
| Netgear router Memory Overload issue | Relevance | 3 Jahren ago | Anonymous | Bugs & Issues |
| My netgear router reports vulnerabilities with eBlocker. Has anyone experienced this? Attachment : IMG_8042.jpeg |
| Update from 2.4.5 to 2.7 not working | Relevance | 3 Jahren ago | Mahakala | eBlocker Open Source Forum |
| Hi, I just donated for Daily Updates and wanted to activate it. I read the Information, that os2.5 is needed and os2.7 is available. But i am not capable to Update and i don‘t know why. When i try to update manually, it sais, that 2.45 is the actual Version. Einstellungen - Lizenz und Aktualisierung - manuelle Aktualisierung doen‘t work. what am I doing wrong? Regards, Mahakala |
| Personal Device Firewall shows ads.domainblockercheck.eblocker.org | Relevance | 3 Jahren ago | Anonymous | eBlocker Open Source Forum |
| Just curiosity… What is ‘ads.domainblockercheck.eblocker.org’ and why is it blocked?Rob Attachment : 70219338-47BC-473E-B2C6-FFED740C1E07.jpeg |
| Donor license | Relevance | 3 Jahren ago | Anonymous | eBlocker Open Source Forum |
| Tried to enter my donor-licence-key under eOS 2.7.4 (Settings/License/ACTIVATE NEW LICENSE, accepting the EUPL, pasted my donor-license-key and filled the email-box) As i still see ‘License type eBlocker Family’ and ‘Activated on 8 march 2021’, i must assume something went wrong or … i did something wrong. regards, Rob |
| Can’t Pause Device | Relevance | 4 Jahren ago | Anonymous | eBlocker Open Source Forum |
| No idea how i got here, but both on my iPhone and on my iPad the ‘Pause’ got stuck. In the Dashboard, tapping Pause and ‘PAUSE EBLOCKER FOR THIS DEVICE’ doesn’t show any response. In Setting/Devices/DEVICE LIST/ for iPad and iPhone, tapping ‘eBlocker not paused for this device’ makes the switch change from grey to red, but only during a split-second (jumps back) and afterward the swich keeps ‘twitching’. I made a screen-recording for both devices. My iMac with Big Sur 11.5 doesn’t show this behavior. Greetings, Rob Attachment : 3CD94646-783D-431A-AE ... |
| Connection-Problems with eBlocker Mobile | Relevance | 4 Jahren ago | Simon | Bugs & Issues |
| Hello everyone, Since today I can connect to the eBlocker with my iPhone SE (2020) via the OpenVPN app. The strange thing is that I haven't changed any settings on the eBlocker. I restarted the eBlocker and my Fritzbox, but nothing helped. Any idea what could help here? |
| Individual network mode / assign same IP | Relevance | 4 Jahren ago | Anonymous | eBlocker Open Source Forum |
| In expert mode there is an option to always assign the same IP-address to various devices. In Individual mode there is no such option; what is the status of the IP’s? Thank you |
| Compatibility Fritzbox 7590? Works well! | Relevance | 4 Jahren ago | Anonymous | eBlocker Open Source Forum |
| I’m under the impression that the FRITZ!Box 7590 is a popular router and it’s behaving well, at least with my (white cube) eBlocker. Why is it not mentioned in the compatibility-list? Rob |
| Only “Domain Blocker not used” OK | Relevance | 4 Jahren ago | Anonymous | eBlocker Open Source Forum |
| iPad 5th gen. IPadOS 14.6. eOS 2.6.2 Both iPad and eBlocker rebooted. Status shows info as per enclosed picture. Change (from normal and perfect behaviour) came out of the blue. Reboot didn’t change anything. Attachment : E5C3CACC-7275-432D-B574-303807F522EF.jpeg Any idea? Rob |
| VyprVPN Connection do not work | Relevance | 4 Jahren ago | Liberty-Bit | Bugs & Issues |
| VPN Connection Test Authentication error Unable to authenticate. This may have different causes, such as your VPN user name or password is incorrect your VPN account is expired or invalid the VPN profile is wrong or corrupted Errors Thu Jun 17 10:58:00 2021 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Thu Jun 17 10:58:00 2021 WARNING: this configuration may cache passwords in memory -- use the auth-nocache option to prevent this Thu Jun 17 10:58:03 2021 AUTH: Received control message: AUT ... |
| No update for white box 2.6 | Relevance | 4 Jahren ago | grmon | Bugs & Issues |
| Thanks to @random at the right spot now: When I go to eblocker.box/settings/#!/home/update and click [Check now] und "manual updates" I only get the message "No updates available" Any ideas anyone? Any help is appreciated. |
| HTTPS using definitions is provided by eBlocker | Relevance | 4 Jahren ago | Anonymous | eBlocker Open Source Forum |
| The topic ‘HTTPS usage’ made me opening this topic. One of the (predefined) app-definitions of eBlocker is ‘Google (Books, Drive, Mail, Movie, Store, Blog)’. I changed its content to ‘youtubegaming.com’ only, a domain i never use. All other domains in this app-definition i considered ‘suspicious’ and, as i assume that these domains are not only relevant for this particular ‘App’ but are allowed system-wide, they had to leave. Is this line of thinking correct? Rob |
| eBlocker Mobile access to LAN-devices | Relevance | 4 Jahren ago | Anonymous | eBlocker Open Source Forum |
| Understood that, if ‘eBlocker Mobile’ is installed on an iPad, you can use that VPN-connection to safely access devices in the the home LAN trough that same connection when away from home. If correct, would somebody be kind enough to tell me how? Rob |
| Passepartout VPN client & eBlocker Mobile issue | Relevance | 4 Jahren ago | Kalle | Bugs & Issues |
| Hello, thank you for the new eblocker version. It works smooth. After the first tests i have found a problem with eblocker mobile for my personal setup. I am using the passepartout openvpn client for ios. This client allows to define trusted networks. That means the vpn connection starts as soon as i leave my home or work wifi. With the actual eblocker version there is no vpn connection with passepartout possible, because eblocker uses compression (see screenshots). According to the developers VPN Compression is a security risk and should not be enabled. ... |
| Trusted App/Whitelist setting for iRobot app | Relevance | 4 Jahren ago | jbrunerwa2 | Bugs & Issues |
| Just purchase an Roomba iRobot 675 and the mobile app won't connect to the cleaner without disabling eblocker. Has anyone by chance already worked out what the exceptions need to be to allow the app to connect without needing to disable eblocker? |
| eBlocker disappeared | Relevance | 4 Jahren ago | Anonymous | Bugs & Issues |
| Checked White Cube with eOS 2.5.8 for update manually last night around 23:00 h. Since then, my eBlocker disappeared and can’t be found by eBlocker-apps both on my iMac and on my iPad. The app on my iPad shows the address 192.168.1.2, but this can’t be changed manually. On the iMac, the address can be changed to 192.168.178.2, but than the app informs me that no eBlocker can be found on this address. My FRITZ!Box is set to always assign the same IPv4-address 192.168.178.2. IPv6 is disabled in the router. iPadOS 14.4.1; macOS 11.2.3 As i don’t know wha ... |
| Tunnelblick 3.8.4a - eBlocker-ovpn-file | Relevance | 4 Jahren ago | Anonymous | eBlocker Open Source Forum |
| Created ovpn-file with eBlocker 2.5.8 and used it on my MacBook with OS X 10.11.6 and Tunnelblick 3.8.4a. I get the enclosed message from Tunnelblick, saying that "it can handle the ovpn-file for now but probably not with future versions of Tunnelblick; the eBlocker's ovpn-file should be updated". Attachment : 210308-0001.png |
| Problem with local sync with mylio app | Relevance | 4 Jahren ago | megawolff | Bugs & Issues |
| Hello, i am using the mylio app which do sync directly in the local LAN beetween clients. With eblocker activatete for these clients the app doesn‘t see the clients. I have only apple decices. What can i do? regards Matthias |
| How to get rid of Google Ads | Relevance | 4 Jahren ago | Anonymous | Bugs & Issues |
| The behaviour of eBlocker tempts me to return to this forum. My environment: FRITZ!Box 7590IPv6 Support: IPv6 support enabled (Checked)IPv6 Connectivity: Use native IPv6 connection iMac with macOS Big Sur version 11.2iMac settings: DNS-servers: 192.168.178.1 and fd00::2e91:abff:fe46:f1c2Safari version 14.0.3 eBlocker in Original White Cube with eBlockerOS 2.5.8DNS Firewall: Use eBlocker as DNS server with Default ForwardingBLOKKER: Pattern BLOKKERs as provided by eBlocker; NO other lists added HTTP support (Dashboard): Both HTTP support and Certificate ch ... |
| Apple WiFi connection problems | Relevance | 4 Jahren ago | jogi | Bugs & Issues |
| Hello at all, does anyone know if the following function leads to interruptions in the wifi connection at apple products in combination with eBlocker: Attachment : Screenshot Apple 01.jpeg Attachment : Screenshot Apple 02.jpeg At irregular intervals, the iPad/iPhone loses the wifi connection and wifi must first be deactivated in the device and then reactivated before an internet connection can be established again. Anyone knows advice? Thanks 😊 |
| eBlocker Dashboard consuming (much) CPU | Relevance | 4 Jahren ago | Valentin | Bugs & Issues |
| Hello everybody, my new Safari told me something very interesting: After a while with opened dasboard, there was a banner which told me that this website is consuming much CPU. And indeed, the task monitor of my Mac grows up to 12% (nearly one core used) by just doing - nothing. So I opened an built in analysis tool (see hardcopies) Attachment : Bildschirmfoto 2021-01-02 um 14.32.20.png Attachment : Bildschirmfoto 2021-01-02 um 14.32.43.png For my opinion, there is indeed too much activity. |
| Issue using https with video software Bigbluebutton | Relevance | 4 Jahren ago | Unbekannt | eBlocker Open Source Forum |
| All, eblocker / System Details see below. My issue is we have to use iserv.eu for homeschooling purposes. This sw is using bigbluebutton for videoconferences. But when trying to enter a meeting I always receive error code #1002 from iserv / bbb and sound/video is not working in any direction. The error code means internet connection error, but internet connection in general is working very well. I tried using several Apple devices (iPad Air2, iPad 7, iPad Air4, MacBook Air 2019) using safari (all latest OS and SW versions). Any other browser (Firefox, chro ... |
| eBlocker along with FritzBox 7490 & Zyxel GS1900-8 | Relevance | 4 Jahren ago | BonyCB | eBlocker Open Source Forum |
| Firs of all a Happy and Good Year 2021 to all! I would need expand my LAN connections of my FritzBox and need to add a smart switch to my network. Where do I need to connect the eBlocker for proper operation? Actual configuration: eBlocker and other devices are connected to FritzBox directly. In addition I've have a Mash configuration using an AVM repeater. Network hardware I'm using right now: FritzBox 7490 with FritzRepeater 1750E, eBlocker on Raspberry 4B with 4GB Intending to consider following smart switch: Zyxel GS1900-8 Appreciate your feedback ... |
| eBlocker building service offered | Relevance | 4 Jahren ago | taipan | eBlocker Open Source Forum |
| Hi all, just in case you know someone who wants an eBlocker but is afraid to install it herself on the Pi, does not know what to do with a Pi, has no clue what Pi and what SD Card to buy, is afraid of the “raw” look of the Pi, never burnt an ISO on an SD Card etc., send them to me. I am offering to prepare an eblocker plus SD and pre-install it for free. Free means, i would require that they donate min 10€ to the project here. I know several people who would like to be tracked less but are afraid of all the “techie” talk to get the eblocker up and running. ... |
| RE: Forum rules / reason for non-approval | Relevance | 4 Jahren ago | taipan | eBlocker Open Source Forum |
| Attachment : 12042D16-7D92-4727-BF1C-073F3F046586.jpeg Hi I select Tor in the eBlocker anonymisation. Then I wanted to go to this page here. Attached is the error message I got. If I use a „regular“ Tor browser it works. Any idea? Regards Taipan |
| Ads, tracker, custom | Relevance | 4 Jahren ago | taipan | eBlocker Open Source Forum |
| Hi I looked in the forum and the user manual but could not find an answer. When I look at the stats I see blocked ads, blocked trackers, blocked custom. What is custom? The manually added filter lists? Or maybe the domains I entered which I added under Tracker and Adblocker rules? Thanks Taipan |