This page is divided into the following sections:
- Time zone and language
- Admin password
- Reboot
- Events
- Diagnostic
- Backup
- Reset
Time zone and language #
Set the time zone and language of the eBlocker Controlbar and eBlocker Console. To set the time zone, first select the region and then the city of your country.
To set the time zone, first select the region and then the city of your country.
To set the language, click either English or German. The desired language is changed immediately.
Admin password #
Activate the admin password for your eBlocker. You can also change the current admin password here.
Reboot #
From this page you can restart or shut down eBlocker.
To restart eBlocker after shutting it down, unplug the device, wait 30 seconds and then reconnect it to the power supply.
Events #
The eBlocker detects events such as the network connection being disconnected or the power supply being disconnected without shutting down the eBlocker. Such events are recorded here for your information.
You are notified in the eBlocker Dashboard if there is a new entry in the event list.
Diagnostic #
If an error occurs, you can generate an automatic diagnostic report via this page, which you can send to us at the e-mail address support@eblocker.com This allows us to find a faster solution. Simply create the diagnostic report by clicking on the orange Generate report button and wait a few seconds. Afterwards you have the possibility to download the file and send it to our support. We will contact you as soon as possible.
Backup #
Save Settings
Here you have the possibility to save most of your settings. If necessary, you can create a backup before restoring the eBlocker factory settings and restore it after restoring the factory settings.
Please note that backup files can be exchanged across different hardware. So you can easily migrate from a “white cube” eBlocker to a Raspberry Pi or vice versa.
The backup file is saved in your download directory.
To restore a backup file, simply click on the Restore settings button and select the backup file from your download directory.
Reset #
Factory Reset
Here you can reset the eBlocker to the factory settings. Please note that all settings and activation will be deleted.
